German English French
WilTec Wildanger Technik GmbH

Shopping Cart:

Contacts

Contact Information

  •  
     

* Required Fields

50600 - 24L Pressure Tank Vessel Expansion for Domestic Water w. EPDM-Membrane

More Views

  • 50600 - 24L Membrankessel Ausdehnungsgefäß Druckkessel Hauswasserwerk mit EPDM
  • 50600 - 24L Membrankessel Ausdehnungsgefäß Druckkessel Hauswasserwerk mit EPDM (1)

24L Pressure Tank Vessel Expansion for Domestic Water w. EPDM-Membrane

Quick Overview

• Pressure Vessel with 24 Liter
• 32,89mm (1") thread connection
• EPDM- Membrane
• for Domestic Waterworks
• Horizontal with Pump-Fixation
€21.48
Incl. 19% VAT, plus. Shipping cost  starting from: €5.50
SKU: 50600
Replacement 24L Pressure Vessel for use in sanitary cold-/hot water systems, suitable for nearly all domestic waterworks, solar- and pressure maintenance systems and garden pumps.

This pressure vessel will be delivered with incl. EPDM membrane and has a 24L capacity. The vessel is designed for a maximum pressure of 5,4 bar and will be delivered in a horizontal position. The tank is checked for tightness with up to 5,4 bar water pressure by the producer.

It has a 1inch (32,89-33,25mm) pump connector.The pressure vessel has additionally an integrated valve for inflating the space betwen tank and membrane.

This vessel series is welded of qualitative steel sheet, according to UNI-EN-standards and is equipped with a heat- and age resistant EPDM-membrane.

About Ethylene-Propylene-Diene-Monomer Rubber:

This EPDM rubber belongs to the group of elastomers. This synthetic material is characterized by resistance to hot air, weathering and ozone.

The elastomer shows low gas permeability, good resistance to chemicals as well as up to 100°C very good noise and shock energy absorption qualities. In the low temperature range the butyl rubber remains elastic up to -70°C.It is mainly used for air hoses and inner cores of tyres, bladders, steam hoses and linings for tanks. Further fields of application are foils, membranes, unvulcanized sealants and bands.

This EPDM rubber is allowed as chewable mass for chewing gum according to Annex 4 on Additive Admission Regulation. Consequently, the material is harmless for drinking water installations.

About the primary pressure in the pressure vessel:
The primary pressure should be set approximately 0,1-0,2 bar lower than the switch-on pressure of the pump and has to be checked at regular intervals. Any failure of observance may cause damage on the EPDM-diaphragm of the pressure vessel. A more accurate calculation results from the pump´s switch-on pressure x 0,9. Example: Switch-on pressure on the pressure switch of the domestic waterworks is set to 1,5bar: 1,5bar x 0,9 = 1,3-1,4 bar
Important: The vessel´s pressure should only be inflated or deflated when the pressure to the water system has been released before.

Attention:
It is absolutely necessary to have released the air and water pressure before the opening of the pressure vessel !
SKU 50600
Weight [kg] 4.6
material Carbon steel
Colours red
Material thickness (in mm) Wall: 1 mm
Ø 267 mm
Connection mm / Ø 32,89-33,25 mm
Temperature range 99°C
Pressure 5.4 bar Water Pressure
Air pressure 1.8 / N2 pressure: 2 bar
Specific Horizontal
Pressure Tank Bore diameter of the retaining feet 8mm
Oblong holes of the pump plate 10mm
Pump plate
Schrader-valve / tyre valve connector
Type WPT 24L
vertical
Wall mounting
Membran EPDM (interchangeable)
net Weight [kg] 4.0000
Package: Height in mm 500
Package: Length in mm 305
Package: Width in mm 305
Availability Immediate dispatch,
available within 2-3 business days*
Shipping Paket

Write Your Own Review

You're reviewing: 24L Pressure Tank Vessel Expansion for Domestic Water w. EPDM-Membrane

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price Performance Ratio
Meets expectations
Ease of use
Design
Overall Score

You may also be interested in the following product(s)

  1. Mèrlett 22mm Spiral Hose Suction Set AG 1" (32.89 mm ) Length: 4 m

    • Made in Italy
    • Working pressure 6 bar
    • Bursting pressure 18 bar
    • Pump connection with 32.89 mm: internal and external thread
    • Ø 22 mm, length 4 m
    €17.98
    (Base price: €4.50 / m)
    Incl. 19% VAT, plus. Shipping cost
    SKU: 72001
  2. 20-24L Membrane Pressure Tank Vessel for Domestic Waterworks EPDM

    • EPDM - Membrane with 20-24 Liter
    • for Pressure Tank Vessel
    • Expansion for Domestic Waterworks
    €7.13
    Incl. 19% VAT, plus. Shipping cost
    SKU: 50604
  3. 20-24L Membrane Pressure Tank Vessel for Domestic Waterworks BUTYL

    • Butyl Rubber - Membrane with 20-24 Liter
    • for Pressure Tank Vessel
    • Expansion for Domestic Waterworks
    €7.13
    Incl. 19% VAT, plus. Shipping cost
    SKU: 50603
  4. 20-24L Membrane Pressure Tank Vessel Expansion for Domestic Waterworks

    • Natural Rubber - Membrane with 20-24 Liter
    • for Pressure Tank Vessel
    • Expansion for Domestic Waterworks
    €6.66
    Incl. 19% VAT, plus. Shipping cost
    SKU: 50601
  5. 20-24L Membrane Pressure Tank Vessel Expansion for Domestic Waterworks

    • Natural Rubber - Membrane with 20-24 Liter
    • for Pressure Tank Vessel
    • Expansion for Domestic Waterworks
    • with flap for mounting valve
    €6.66
    Incl. 19% VAT, plus. Shipping cost
    SKU: 50605
  6. Steelflex Tube 0.5m 1" for Domestic Waterworks

    • Reinforced hose, flexible hose DN25 0,5m
    • 33mm(1") ET & 30,5mm (1") union nut, bending
    • Braided with stainless steel
    • E.g. Pressure vessels in domestic waterworks
    €11.76
    (Base price: €23.52 / m)
    Incl. 19% VAT, plus. Shipping cost
    SKU: 50633
  7. Flexible Steel Hose 1m 1" for Domestic Waterworks

    • Reinforced hose, flexible hose DN25 1m
    • 33mm(1") ET & 30,5mm (1") union nut, bending
    • Braided with stainless steel
    • E.g. Pressure vessels in domestic waterworks
    €15.28
    (Base price: €15.28 / m)
    Incl. 19% VAT, plus. Shipping cost
    SKU: 50634
  8. 24L INOX Pressure Tank Vessel Expansion Domestic Water w.EPDM-Membrane

    • Pressure Vessel Stainless Steel 24 Liter
    • 32,89mm (1") thread connection
    • Natural Rubber Membrane
    • for Domestic Waterworks
    • Horizontal with Pump-Fixation
    €41.50
    Incl. 19% VAT, plus. Shipping cost
    SKU: 50602
  9. 50L Pressure Tank Vessel Expansion for Domestic Water w EPDM-Membrane

    • Pressure Vessel with 50 Liter
    • 32,89mm (1") thread connection
    • EPDM- Membrane
    • for Domestic Waterworks
    • Horizontal with Pump-Fixation
    €41.48
    Incl. 19% VAT, plus. Shipping cost
    SKU: 50640
  10. 50L Pressure Tank Vessel Expansion for Domestic Water w EPDM-Membrane

    • Pressure Vessel with 50 Liter
    • 32,89mm (1") thread connection
    • EPDM- Membrane
    • for Domestic Waterworks
    • Vertical Mounting
    €41.48
    Incl. 19% VAT, plus. Shipping cost
    SKU: 50642
*All prices are including VAT plus shipping costs