XPOtool Tile Levelling System Pliers with Adjustable Clamp Range for Tile, Slab and Flagstone Floors
7,99 €*
Ceny zawierają podatek VAT + Koszty wysyłki
Natychmiast dostępny, czas dostawy 2 - 3 days(1)
• Special fastening pliers for tile levelling
• Pliers to press wedges into spacer clips
• Clamping range position is lockable
• Screw bolt for adjustable clamp range
• Tool for lipless and even tile laying
Simply place the spacers in the joint and lay the neighbouring tile. Then, the wedge is pushed through the clip using the fastening pliers. For an optimal result, the wedges should be pressed into the clip with even pressure and depth. The clamp range can be adjusted to the wedges’ size at the front arm of the pliers. To set the depth, the tile levelling pliers are equipped with a screw bolt at the handle.
Produktart: | Fliesen-Nivelliersystem |
---|
Empfehlung: Werkzeug Fliesen
Dostępny, czas dostawy 2 - 3 days
• Suitable e.g. for WilTec Item ID: 51975
• Ø 180 mm
• Thickness: 2,2 mm
• Bore: 22,2 mm
Dostępny, czas dostawy 2 - 3 days
• Bearing Surface Inclination Range: 0 - 45°
• Rpm: 2950
• Bearing Surface Dimensions: 33 x 36 cm
• Protection Class: IP54
Dostępny, czas dostawy 2 - 3 days
• No load speed: 3000 rpm
• Cutting length: 520 mm
• Cutting depth: max. 30 mm
• Cutting angle: up to 45°
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 3.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Perfect tool for tiling floors and more
• For use in combination with spacer clips
• The levelling wedges are reusable
• For laying tiles at the same height level
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 1.0 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 1.5 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 2.0 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 2.5 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 3.0 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• Perfect tool for tiling
• For use in combination with pull tabs
• Compensate height differences
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 3.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Perfect tool for tiling
• For use in combination with pull tabs
• Compensate height differences
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Empfehlung: Werkzeug Fliesenbohrer
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 100 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 115 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 120 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 125 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 130 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 18 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 20 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 25 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 32 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 35 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 38 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 40 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 45 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 50 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 55 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 60 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 65 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 68 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 6 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 8 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 10 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 12 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 14 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 70 mm
• Speed: max. 800 rpm
Empfehlung: Werkzeug Diamanttrennscheibe
Dostępny, czas dostawy 2 - 3 days
• Bore: 22.23 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 22.23 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 22.23 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 22.23 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 25.4 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 30 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Aufnahmebohrung: 22,23 mm
• Segmenthöhe: 10 mm
• Mit Kühllöchern
• Für verschiedene Einsatzbereiche