XPOtool Tile Levelling System Set with 300 Tile Wedges and 1 Pair of Levelling Pliers, Laying Aid
26,49 €*
Ceny zawierają podatek VAT + Koszty wysyłki
Natychmiast dostępny, czas dostawy 2 - 3 days(1)
• Set for even laying of tiles
• 300 re-usable tile wedges
• Pair of pliers with fixable pushing depths
After the corresponding pull tabs (not included) have been placed in the joint and the adjacent tile laid in, the wedges are pushed through the pull tab. The wedge is pressed through the tab until the two tiles have reached the same height.
With the pliers, the tile wedges can be pushed through a pull tab with more regular pression than you would be able by hand. To set the push depth, the tile levelling pliers are equipped with a screw bolt at the handle.
After the tile adhesive has hardened, the wedges can be pulled out of the tabs and are re-usable.
In order to be able to tile quite a large area, the XPOtool tile levelling system set contains sufficient tile wedges.
Produktart: | Fliesen-Nivelliersystem |
---|
Empfehlung: Werkzeug Fliesen
Dostępny, czas dostawy 2 - 3 days
• Suitable e.g. for WilTec Item ID: 51975
• Ø 180 mm
• Thickness: 2,2 mm
• Bore: 22,2 mm
Dostępny, czas dostawy 2 - 3 days
• Bearing Surface Inclination Range: 0 - 45°
• Rpm: 2950
• Bearing Surface Dimensions: 33 x 36 cm
• Protection Class: IP54
Dostępny, czas dostawy 2 - 3 days
• No load speed: 3000 rpm
• Cutting length: 520 mm
• Cutting depth: max. 30 mm
• Cutting angle: up to 45°
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 3.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Perfect tool for tiling floors and more
• For use in combination with spacer clips
• The levelling wedges are reusable
• For laying tiles at the same height level
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 1.0 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 1.5 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 2.0 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 2.5 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 3.0 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• Perfect tool for tiling
• For use in combination with pull tabs
• Compensate height differences
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 3.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Perfect tool for tiling
• For use in combination with pull tabs
• Compensate height differences
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Empfehlung: Werkzeug Fliesenbohrer
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 100 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 115 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 120 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 125 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 130 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 18 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 20 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 25 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 32 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 35 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 38 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 40 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 45 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 50 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 55 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 60 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 65 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 68 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 6 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 8 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 10 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 12 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 14 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 70 mm
• Speed: max. 800 rpm
Empfehlung: Werkzeug Diamanttrennscheibe
Dostępny, czas dostawy 2 - 3 days
• Bore: 22.23 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 22.23 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 22.23 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 22.23 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 25.4 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 30 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Aufnahmebohrung: 22,23 mm
• Segmenthöhe: 10 mm
• Mit Kühllöchern
• Für verschiedene Einsatzbereiche