XPOtool Tile Levelling System Set with 800 Pull Tabs 1.5mm & 1 Pair of Levelling Pliers, Laying Aid
41,99 €*
Ceny zawierają podatek VAT + Koszty wysyłki
Natychmiast dostępny, czas dostawy 2 - 3 days(1)
• Set allowing regular laying of tiles
• Suitable for tiles with a tickness from 3 to 12 mm
• 800 pull tabs for a 1.5 mm tile seam
• 1 pair of pliers with fixable pushing depth
First, the pull tabs are placed in the joint or seam. Once the adjacent tile placed, the wedges (not included) are pushed through the tabs until the two tiles are level. With the pliers, the wedges can be pushed into the pull tabs with more uniform pressure. To set the push depth, the tile levelling pliers are also equipped with a screw bolt at the handle.
After the tile adhesive has hardened, the wedges can be pulled out of the tabs and are re-usable. The pull tabs, on the other hand, have predetermined breaking points at which the visible part of the tab is broken off. The lower part remains between the tiles and is grouted along with them; after gouging, the remains of the tabs are no longer visible.
The width of the joint depends on the material thickness of the tab. To give you an example: A tab with a thickness of 1.0 mm creates a joint or seam that is also 1.0 mm wide. In order to be able to tile quite a large area, the XPOtool tile levelling system set contains sufficient pull tabs. The tile levelling system pull tabs are suitable for slabs with a thickness from 3 to 12 mm.
Produktart: | Fliesen-Nivelliersystem |
---|
Empfehlung: Werkzeug Fliesen
Dostępny, czas dostawy 2 - 3 days
• Suitable e.g. for WilTec Item ID: 51975
• Ø 180 mm
• Thickness: 2,2 mm
• Bore: 22,2 mm
Dostępny, czas dostawy 2 - 3 days
• Bearing Surface Inclination Range: 0 - 45°
• Rpm: 2950
• Bearing Surface Dimensions: 33 x 36 cm
• Protection Class: IP54
Dostępny, czas dostawy 2 - 3 days
• No load speed: 3000 rpm
• Cutting length: 520 mm
• Cutting depth: max. 30 mm
• Cutting angle: up to 45°
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 3.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Perfect tool for tiling floors and more
• For use in combination with spacer clips
• The levelling wedges are reusable
• For laying tiles at the same height level
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 1.0 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 1.5 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 2.0 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 2.5 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• For laying tiles at the same height level
• Suitable for a joint width of 3.0 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Dostępny, czas dostawy 2 - 3 days
• Perfect tool for tiling
• For use in combination with pull tabs
• Compensate height differences
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 3.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Perfect tool for tiling
• For use in combination with pull tabs
• Compensate height differences
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Dostępny, czas dostawy 2 - 3 days
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Empfehlung: Werkzeug Fliesenbohrer
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 100 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 115 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 120 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 125 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 130 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 18 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 20 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 25 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 32 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 35 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 38 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 40 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 45 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 50 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 55 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 60 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 65 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 68 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 6 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 8 mm
• Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 10 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 12 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
- Coating: Vacuum brazed diamonds
- Diameter: Ø 14 mm
- Speed: max. 800 rpm
Dostępny, czas dostawy 2 - 3 days
• Coating: vacuum brazed diamonds
• Diameter: Ø 70 mm
• Speed: max. 800 rpm
Empfehlung: Werkzeug Diamanttrennscheibe
Dostępny, czas dostawy 2 - 3 days
• Bore: 22.23 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 22.23 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 22.23 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 22.23 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 25.4 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Bore: 30 mm
• 10 mm turbo segment
• With cooling holes
• For various areas
Dostępny, czas dostawy 2 - 3 days
• Aufnahmebohrung: 22,23 mm
• Segmenthöhe: 10 mm
• Mit Kühllöchern
• Für verschiedene Einsatzbereiche