Diamond Hole Saw Drill Bit Cutter Tile Glass Ceramic 120mm
€27.99*
Prices incl. VAT plus Shipping costs
No longer available
• Base material: steel
• Coating: vacuum brazed diamonds
• Diameter: Ø 120 mm
• Speed: max. 800 rpm
Thanks to the vacuum brazing process, this drill bit, which consists primarily of steel, is more durable than comparable diamond-coated drill bits. The higher number of diamonds and the closer connection of the gemstones with the carrier material not only increase the effectiveness and longevity of the drill bit, but also allow it to be used as a dry drill with most materials. This makes the use of coolants largely superfluous and thus increases the stability of the drill.
When machining particularly hard materials, it should be noted that unless an automatic cooling device is used, a coolant should be used to ensure successful drilling and the longevity of the drill bit. Also, make sure to wear the appropriate protective clothing, such as safety goggles and dust mask, to prevent any injury.
• Can be used on angle grinders with an M14x2.0 mount at high rotation speeds
• With triangular mount as a rotation stop
• Cooling ensured by integrated paraffin emulsion (no additional cooling required)
Empfehlung: Werkzeug Fliesenbohrer
Currently not available
• Coating: vacuum brazed diamonds
• Diameter: Ø 100 mm
• Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 10 mm
- Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 115 mm
- Speed: max. 800 rpm
Currently not available
• Coating: vacuum brazed diamonds
• Diameter: Ø 120 mm
• Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 125 mm
- Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 12 mm
- Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 130 mm
- Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 14 mm
- Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 16 mm
- Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 18 mm
- Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 20 mm
- Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 25 mm
- Speed: max. 800 rpm
Currently not available
• Coating: vacuum brazed diamonds
• Diameter: Ø 32 mm
• Speed: max. 800 rpm
Currently not available
• Coating: vacuum brazed diamonds
• Diameter: Ø 35 mm
• Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 38 mm
- Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 40 mm
- Speed: max. 800 rpm
Currently not available
• Coating: vacuum brazed diamonds
• Diameter: Ø 45 mm
• Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 50 mm
- Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 55 mm
- Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 60 mm
- Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 65 mm
- Speed: max. 800 rpm
Currently not available
- Coating: Vacuum brazed diamonds
- Diameter: Ø 68 mm
- Speed: max. 800 rpm
Currently not available
• Coating: vacuum brazed diamonds
• Diameter: Ø 6 mm
• Speed: max. 800 rpm
Currently not available
• Coating: vacuum brazed diamonds
• Diameter: Ø 70 mm
• Speed: max. 800 rpm
Empfehlung: Werkzeug Fliesen
Currently not available
• No load speed: 3000 rpm
• Cutting length: 520 mm
• Cutting depth: max. 30 mm
• Cutting angle: up to 45°
Currently not available
• Suitable e.g. for WilTec Item ID: 51975
• Ø 180 mm
• Thickness: 2,2 mm
• Bore: 22,2 mm
Currently not available
• Bearing Surface Inclination Range: 0 - 45°
• Rpm: 2950
• Bearing Surface Dimensions: 33 x 36 cm
• Protection Class: IP54
Currently not available
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Currently not available
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Currently not available
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Currently not available
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Currently not available
• Aid allowing regular laying of tiles
• Suitable for a joint width of 3.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Currently not available
• Perfect tool for tiling floors and more
• For use in combination with spacer clips
• The levelling wedges are reusable
• For laying tiles at the same height level
Currently not available
• For laying tiles at the same height level
• Suitable for a joint width of 1.0 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Currently not available
• For laying tiles at the same height level
• Suitable for a joint width of 1.5 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Currently not available
• For laying tiles at the same height level
• Suitable for a joint width of 2.0 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Currently not available
• For laying tiles at the same height level
• Suitable for a joint width of 2.5 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Currently not available
• For laying tiles at the same height level
• Suitable for a joint width of 3.0 mm
• With rated break point for easy removal
• Suitable for 3 to 12 mm tile thickness
Currently not available
• Perfect tool for tiling
• For use in combination with pull tabs
• Compensate height differences
Currently not available
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Currently not available
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Currently not available
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Currently not available
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Currently not available
• Aid allowing regular laying of tiles
• Suitable for a joint width of 3.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Currently not available
• Perfect tool for tiling
• For use in combination with pull tabs
• Compensate height differences
Currently not available
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Currently not available
• Aid allowing regular laying of tiles
• Suitable for a joint width of 1.5 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Currently not available
• Aid allowing regular laying of tiles
• Suitable for a joint width of 2.0 mm
• With predetermined breaking point
• Suitable for tiles with a tickness from 3 to 12 mm
Empfehlung: Werkzeug Mörtel
Currently not available
• Can mix more liquid as well as thicker compounds
• Ergonomically shaped handle
• Speed: max. 700 rpm
• Incl. 1 set of carbon brushes
Currently not available
• Can mix more liquid as well as thicker compounds
• Ergonomically shaped handle
• Speed: 100-600 rpm
• Incl. 1 set of carbon brushes