H-Tronic AL 800 for 6V and 12V Battery Automatic Charger
€14.99*
Prices incl. VAT plus Shipping costs
No longer available
• 6V/ 12V
• Switching power supply technology
Due to the fully electronic voltage and current limit, a connected battery is always kept at the optimum charging and simultaneously prevents the dangerous overcharging and the resulting formation of explosive detonating gas.
The battery charges with a maximum load current of 800 mA. The battery charger prevents the harmful discharge, for instance, by normal discharge (about 1% per day) or due to insufficient charging periods (short distance), overload (to many consumers) and a possibly too low loading capacity of the alternator. The charging voltage can be set from 6 volts and 12 volts via a sliding switch. For a short time the charger is short-circuit proof as well as reverse-polarity proof. A reverse polarity is indicated via an LED control light.
A charging controll and polarity indicator give information about the charger´s correct state of operation. This battery charger provides for a gentle charging (IU-characteristic). At any time it keeps ready motorcycles, cars, classic cars, ships, campers, tractors and any equipment that is not used for a longer period of time (for instance during the wintertime), thus protecting the battery against harmful deep discharge. An overloading of the battery is excluded. This also applies for maintenance-free lead and lead-gel respectively, exid, AHG, AGM, micro fleece and acid batteries.
Details:
• modern switching power supply technology
• Short-circuit proof protection and reverse polarity protection
• Constant final charging voltage
• Automatic charging current adjustment
• No charging when battery is connected polarity-reversed
• Charging takes place only when battery is connected correctly
• Visual display regarding power, charge and reverse polarity
• Electronic short-circuit protection, revese polarity and overload protection
Abmessungen: | 85 x 65 x 35mm |
---|---|
Ausgangsspannung: | 6 V, 12 V |
Batterieart: | AGM-Batterien, Blei-Säure-Batterien, Gel-Batterien |
Ladestrom eff.: | 0,8 A |
Material: | Kunststoff |
Modell: | AL 800 |
Netzspannung/Frequenz (V~Hz): | 220–240 V / 50 Hz |
Produktart: | Batterieladegerät |
Schlauch: Oberfläche: | glatt/glatt |
Schutzart (IP): | IP20 |
Empfehlung: Werkstatt Batterieladegeräte
Currently not available
• Diameter 10,5 mm
• Voltage 12V / 24V
• Max. Current 350 A
• Grip clips isolated
Currently not available
• Diameter 9,0 mm
• Voltage 12V / 24V
• Max. Current 220 A
• Grip clips isolated
Currently not available
• Diameter 13,5 mm
• Voltage 12V / 24V
• Max. Current 480 A
• Grip clips isolated
Currently not available
• Lead-acid batteries
• 12 V / 2 A, 12 V / 15 A, 24 V / 7.5 A
• LED displays
Currently not available
• Suitable for 6 V and 12 V lead-acid batteries
• Short circuit protection
• Overheating protection
• Overcharging protection
Currently not available
• Suitable for 12 V and 24 V lead-acid batteries
• Short circuit protection
• Overheating protection
• Overcharging protection
Currently not available
• 2-pin, key with chain inclusive
• long-term power 500 A, peak power 250 A
• also as immobiliser
Currently not available
• for cars, boats and yacht
• Long-term power 275 A CC, nominal voltage 48 VC
• Simple installation and application
Currently not available
• Tests the charge status
• Practical handle
• 2 clamping tongs with 30 cm supply cable
• Button for measuring functions
Currently not available
• Power input: 64 W
• Effective charging current: 6 A
• Connection cable length: approx. 168 cm
• Charging cable length: approx. 140 cm
Currently not available
• Lead-acid batteries
• 6V / 2A,12V / 2A,12V / 10A
• LED-display
Currently not available
• Battery charger for 12 V and 24 V
• Booster function
• Lead-acid battery with min. 30 Ah–max. 200 Ah
• Workshop charger: transporter, car, motorcycle
Currently not available
• Battery charger for 12 V and 24 V
• Booster function
• Lead-acid battery with min. 50 Ah–max. 750 Ah
• Workshop charger: truck, bus, car, motorcycle
Currently not available
• Battery charger for 12 V and 24 V
• Booster function
• Lead-acid battery with min. 50 Ah–max. 800 Ah
• Workshop charger: truck, bus, car, motorcycle
Currently not available
• Permanent charging
Currently not available
• Battery chargers
• Diagnostic devices
• Tasting devices
Currently not available
• Switching power supply technology
Currently not available
• Switching power supply technology
Currently not available
• Protective back strip for the housing base
• Colour: black
Currently not available
• Protective front strip for the housing base
• Colour: black
Currently not available
• Manual switching between 6-V/12-V charging voltage
• Overheating, overcharging, polarity protection
• Fully automated charging process in 8 steps
• With LCD display to monitor the loading process
Currently not available
• Manual switching between 6V/12V charging voltage
• Overheat, polarity, low voltage, short protected
• Fully automated charging process in 8 steps
• With LCD display to monitor the loading process
Empfehlung: Werkstatt Reifenlagerung
Currently not available
• Max. load per holder 50 kg
• Diameter bracket 38 mm
• Length bracket 35 cm
• Incl. mounting material
Currently not available
• Size: 1160 x 450 x 450 mm
• Loading capacity: max. 100 kg
• Pipe diameter: ⌀ 35 mm
• Compatible with tyres up to 225 mm width
Currently not available
• Movable
• Tyre width 225 mm
• 3 wheels
Currently not available
• Up to 150 kg load capacity
• Feet that protect the floor
• Sturdy steel construction
• Adjustable Height
Currently not available
• Fully galvanized steel frame
• Plug-in system for easy installation
• Load capacity per level 100 kg
• Weight 7.34 kg
Currently not available
• Fully Galvanized Steel Frame
• Bottom Plate made of MDF
• Loading Capacity per Level 265 kg
• Max. Loading Capacity 795 kg
Currently not available
• Protects sports cars and luxury vehicles
• Dimensions: 495 x 205 x 62 mm
• Solid plastic
• Suitable for 10–36 Inches
Currently not available
• Wall holder
• Steel, powder coated
• Loadable to 130 kg
• Adjustable width
Currently not available
• 4 pieces
• Load capacity: 25 kg
• Easy mounting
Currently not available
• 8 pieces
• Load capacity: 25 kg
• Easy mounting
Currently not available
• max. 225 mm wheels
• height 102 cm
• load capacity up to max. 100 kg
• diameter spacer 14,5 cm
Currently not available
• 440×200×40 mm
• Suitable for 13–18 inch
• Protect tyres from damage
• Stable plastic
Empfehlung: Werkstatt Wagenheber
Currently not available
• Load capacity: max. 12 t
• Pneumatic or manual operation
• Ram saddle can be taken out
• Continuously adjustable
Currently not available
• Load capacity: max. 20 t
• Pneumatic or manual operation
• Ram saddle can be taken out
• Continuously adjustable
Currently not available
• Loading capacity: max. 200 kg (per trestle)
• Dimensions: 58 x 68 x 80 - 130 cm
• Multi-stage height adjustment
• Foldable
Currently not available
• Can be used for many different applications
• Minimum lifting weight: 15.3 cm
• Maximum lifting weight: 122 cm
• Ideal for lifting, jacking and levering
Currently not available
• Versatilely applicable
• Up to 3000 kg loadable
• Lifting height min: 15,5 cm
• Lifting height max: 135 cm
Currently not available
• Minimum height: 245 mm
• Maximum lifting height: 535 mm
• Weight: 35 kg
• Pneumatic
Currently not available
• Load capacity 2000 kg each
• Foldable
• Mounting height 27 cm • 36,5 cm
Currently not available
• Load capacity 3000 kg each
• Height-adjustable
• Mounting height 287-430 mm
Currently not available
• Load capacity 6000 kg each
• Height-adjustable
• Mounting height 410-580 mm
Currently not available
• Additional height adjustment possible
• Slow down function for safe lowering
• Compact and robust construction
• Max. height: 390 mm
Currently not available
• Additional height adjustment possible
• Slow down function for safe lowering
• Compact and robust construction
• Max. height: 400 mm
Currently not available
• Additional height adjustment possible
• Slow down function for safe lowering
• Compact and robust construction
• Max. height: 449 mm
Currently not available
• Additional height adjustment possible
• Slow down function for safe lowering
• Compact and robust construction
• Max. height: 308 mm
Currently not available
• Additional height adjustment possible
• Slow down function for safe lowering
• Compact and robust construction
• Max. height: 465 mm
Currently not available
• Additional height adjustment possible
• Slow down function for safe lowering
• Compact and robust construction
• Max. height: 382 mm
Currently not available
• Trestle, roller, V-roller and roller ball stand
• Load: trestle 200 kg, roller 100 kg, V-roller 45 kg
• Adjustable in height from 83–129 cm
• Can be folded up for space-saving storage
Currently not available
• Universally applicable
• Robust metal construction
• powerful hydraulics
• compact
Currently not available
• Max. load capacity of 2,000 kg
• Equipped with rubber pads
• Reduces the risk of your vehicle deforming
• Distributes the lifting charge on two seating points
Currently not available
• Made of steel
• Max. lifting height: 350 mm
• 2 lifting points: claw and head
• Use with crank
Currently not available
• Made of steel
• Max. lifting height: 350 mm
• 2 lifting points: claw and head
• Use with crank
Currently not available
• Made of steel
• Max. lifting height: 300 mm
• 2 lifting points: claw and head
• Use with crank
Currently not available
• Min. height: 85 mm
• Max. height: 500 mm
• Double-piston drive
• Equipped with rollers
Currently not available
• Car jack lifting height 135–335 mm
• Foldable chassis stands
• Working height stands 270–365 mm
• From steel