PTO Freewheel Clutch 201mm, 1 3/8" Male/Female Thread PTO-Shaft 6 Multi Spline max. Torque 2400Nm
€44.99*
Prices incl. VAT plus Shipping costs
Available in 44 days, delivery time 2 - 3 days (1)
• 6-spline PTO freewheel clutch
• Max. torque: 2400 Nm
• Size: 201 mm
• Yoke type 1 (tractor): 1⅜″, 34.9 mm, 6-spline (male thread)
• Yoke type 2 (attachment): 1⅜″, 34.9 mm, 6-spline (female thread)
For the PTO shaft to be connected to both tractor and attachment, a clutch or coupling is required that transmits the power of the tractor to the shaft and that the shaft can turn into. The shaft itself is meant to transfer the kinetic energy to the agricultural machine to be operated. However, if the attachment continues operation after the drive of the PTO shaft has been switched off (e.g., with drum-type mowers or mulchers), a special freewheel clutch is required that prevents the shaft from being strained too much from the continued operation by not transmitting the torque to the stub of the PTO shaft.
This might be helpful, e.g., when you release the gas pedal to turn the tractor. With a rigid coupling, this can also slow down the attachment that could actually continue to run. Fuel can be saved in this way because the attachment does not have to be revved up again after turning. This also prevents an attachment still running turns off the stub of the PTO shaft if the tractor engine suddenly stops or “floods” during use.
Thanks to its standardised size, the freewheel clutch fits to every common PTO shaft. Nevertheless, to find the correct clutch, take note of the given technical data and check that these match the PTO shaft, tractor, and attachment. Moreover, we ask you to consider the need of the freewheel clutch to be adapted to the individual attachment before operation.
We would also like to suggest to your kind attention our PTO shafts, PTO clutches, splines, and sleeves in different versions to purchase in our shop. Thus, you are able to compose the entire power-transmission unit that you need and also find spare parts. There is certainly a part that fits the requirements of your machines.
Safety instructions for PTO shafts:
– All shafts, complete and replacement shafts, and all drive-shaft adapters and components as well as their locking devices can under certain circumstances catch or wind up clothing worn on the body during operation.
– Always ensure sufficient safety distance and additional protective devices appropriate to the application! Wear tight-fitting work clothes!
– Make sure that nobody is near the PTO shaft while it is in operation.
Anschlüsse: | 1 3/8 Zoll, 34,9 mm, Z6 (Traktor: AG, Anbaugerät: IG) |
---|---|
Material: | Stahl |
Produktart: | Zapfwelle |
präzise Produktart: | Gelenkwelle |
Empfehlung: Zapfwelle
Available in 44 days, delivery time 2 - 3 days
• Length: 140 mm
• Connection spline housing: 1⅜″, 6 notches
• Connection output shaft: 1⅛″, 6 teeth
• Diameter: ø 36 mm (inner with notch), ø 28.52 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 140 mm
• Connection spline housing: 1⅜″, 6 notches
• Connection output shaft: 1⅛″, 6 teeth
• Diameter: ø 36 mm (inner with notch), ø 28.52 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 1⅜″, 21 notches
• Connection output shaft: 1⅜″, 21 teeth
• Diameter: ø 36 mm (inner with notch), ø 34.87 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 1⅜″, 21 notches
• Connection output shaft: 1⅜″, 21 teeth
• Diameter: ø 36 mm (inner with notch), ø 34.87 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 1⅜″, 6 notches
• Connection output shaft: 1⅜″, 21 teeth
• Diameter: ø 36 mm (inner with notch), ø 34.87 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 1⅜″, 6 notches
• Connection output shaft: 1⅜″, 21 teeth
• Diameter: ø 36 mm (inner with notch), ø 34.87 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 8–32x38x6
• Connection output shaft: 1⅜″, 21 teeth
• Diameter: ø 39 mm (inner with notch), ø 34.87 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 8–32x38x6
• Connection output shaft: 1⅜″, 21 teeth
• Diameter: ø 39 mm (inner with notch), ø 34.87 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 8–32x38x6
• Connection output shaft: 1⅜″, 6 teeth
• Diameter: ø 39 mm (inner with notch), ø 34.87 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 8–32x38x6
• Connection output shaft: 1⅜″, 6 teeth
• Diameter: ø 39 mm (inner with notch), ø 34.87 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 1⅜″, 21 notches
• Connection output shaft: 8–32x38x6
• Diameter: ø 36 mm (inner with notch), ø 37.95 mm (outer with toothaußen mit Zahn)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 1⅜″, 6 notches
• Connection output shaft: 1⅜″, 6 teeth
• Diameter: ø 36 mm (inner with notch), ø 34.87 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 1⅜″, 6 notches
• Connection output shaft: 1⅜″, 6 teeth
• Diameter: ø 36 mm (inner with notch), ø 34.87 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 1⅜″, 6 notches
• Connection output shaft: 8–32x38x6
• Diameter: ø 36 mm (inner with notch), ø 37.92 mm (outer with toothaußen mit Zahn)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 1⅜″, 6 notches
• Connection output shaft: 8–32x38x6
• Diameter: ø 39 mm (inner with notch), ø 37.92 mm (outer with toothaußen mit Zahn)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 8–32x38x6
• Connection output shaft: 8–32x38x6
• Diameter: ø 39 mm (inner with notch), ø 37.95 mm (outer with toothaußen mit Zahn)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 1⅜″, 21 notches
• Connection output shaft: 1⅜″, 6 teeth
• Diameter: ø 36 mm (inner with notch), ø 34.87 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 160 mm
• Connection spline housing: 1⅜″, 21 notches
• Connection output shaft: 1⅜″, 6 teeth
• Diameter: ø 36 mm (inner with notch), ø 34.87 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 165 mm
• Connection spline housing: 1⅜″, 21 notches
• Connection output shaft: 8–32x38x6
• Diameter: ø 36 mm (inner with notch), ø 37.95 mm (outer with toothaußen mit Zahn)
Available in 44 days, delivery time 2 - 3 days
• Length: 165 mm
• Connection spline housing: 8–32x38x6
• Connection output shaft: 8–32x38x6
• Diameter: ø 39 mm (inner with notch), ø 37.95 mm (outer with toothaußen mit Zahn)
Available in 44 days, delivery time 2 - 3 days
• Length: 175 mm
• Connection spline housing: 1¾″, 20 notches
• Connection output shaft: 1¾″, 20 teeth
• Diameter: ø 46 mm (inner with notch), ø 44.3 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 175 mm
• Connection spline housing: 1¾″, 20 notches
• Connection output shaft: 1¾″, 6 teeth
• Diameter: ø 46 mm (inner with notch), ø 44.37 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 175 mm
• Connection spline housing: 1¾″, 20 notches
• Connection output shaft: 1⅜″, 21 teeth
• Diameter: ø 46 mm (inner with notch), ø 34.87 mm (outer with tooth)
Available in 44 days, delivery time 2 - 3 days
• Length: 175 mm
• Connection spline housing: 1¾″, 20 notches
• Connection output shaft: 1⅜″, 6 teeth
• Diameter: ø 45.5 mm (inner with notch), ø 34.87 mm (outer with tooth)
Empfehlung: Forst Forstzangen
Available in 44 days, delivery time 2 - 3 days
• Universal felling aid
• Turns logs of up to 540 mm
• Support tool for chainsaw
• Less effort thanks to efficient leverage
Available in 44 days, delivery time 2 - 3 days
• Universal felling aid
• Turns logs of up to 250 mm
• Support tool for chainsaw
• Less effort thanks to efficient leverage
Available in 44 days, delivery time 2 - 3 days
• Stable and robust
• Long handle for more leverage
• Easy to use
• for soft and uneven ground
Available in 44 days, delivery time 2 - 3 days
• Jaw opening approx. 850 mm
• Material thickness 60 x 8 + M16 8.8 screws
• Shackles with max. 1500 kg load capacity
Available in 44 days, delivery time 2 - 3 days
• Equipped with 4 claws
• For logs with a diameter of up to ø 131 cm
• Max. loading capacity: 1500 kg
• Sturdy steel construction
Available in 44 days, delivery time 2 - 3 days
• Equipped with 2 claws
• For logs with a diameter of up to Ø 45 cm
• Max. loading capacity: 300 kg
• Sturdy construction with secrue grip
Available in 44 days, delivery time 2 - 3 days
• Equipped with 4 claws
• For logs with a diameter of up to Ø 55 cm
• Max. loading capacity: 500 kg
• Sturdy steel construction
Available in 44 days, delivery time 2 - 3 days
• Equipped with 2 claws
• For logs with a diameter of up to ø 62 cm
• Max. loading capacity: 450 kg
• Sturdy construction with secrube grip
Available in 44 days, delivery time 2 - 3 days
• Equipped with 2 claws
• For logs with a diameter of up to ø 81cm
• Max. loading capacity: 700 kg
• Sturdy construction with secure grip
Available in 44 days, delivery time 2 - 3 days
• Equipped with 2 claws
• For logs with a diameter of up to Ø 63 cm
• Max. loading capacity: 550 kg
• Sturdy construction with secure grip
Available in 44 days, delivery time 2 - 3 days
• Equipped with 4 claws
• Max. jaw opening of 930 mm grabs logs up to 930 mm
• Max. loading capacity: 1000 kg
• Sturdy steel construction
Available in 44 days, delivery time 2 - 3 days
• Made of high-quality steel
• Weatherproof powder coating
• Self-tensioning
• Secure grip
Available in 44 days, delivery time 2 - 3 days
• Made of high-quality steel
• Weatherproof powder coating
• Self-tensioning
• Secure grip
Available in 44 days, delivery time 2 - 3 days
• The chainsaw does not touch the ground
• For logs with a diameter of max. 35 cm
• 130 cm long bar with rubber coated handpieces
• Back-friendly and energy-saving
Available in 44 days, delivery time 2 - 3 days
• Hooks: 240 x 140 x 100 mm
• Load capacity: max. 75 kg (165 lbs)
• With ergonomic plastic handle
Available in 44 days, delivery time 2 - 3 days
• Equipped with 2 claws
• Jaw opening for logs of up to 520 mm
• Lifts wood of up to 500 kg
• Sturdy construction
Available in 44 days, delivery time 2 - 3 days
• For log wood of up to ø 620 mm
• Suitable for up to 1000 kg
• Sturdy construction
• With small hooks for secure grip
Available in 44 days, delivery time 2 - 3 days
• Equipped with claws and hooks on each side
• Jaw opening for logs of up to ø 760 mm
• Lifts wood of up to 1500 kg
• Sturdy construction
Available in 44 days, delivery time 2 - 3 days
• Jaw opening for logs of up to 600 mm
• Lifts wood of up to 800 kg
• Claws with small hooks for secure grip
• Sturdy construction
Available in 44 days, delivery time 2 - 3 days
• Equipped with claws and hooks on each side
• Jaw opening for logs of up to 520 mm
• Lifts wood of up to 500 kg
• Sturdy construction
Available in 44 days, delivery time 2 - 3 days
• Jaw opening for logs of up to 620 mm
• Lifts wood of up to 1200 kg
• Sturdy construction
Available in 44 days, delivery time 2 - 3 days
• Equipped with claws on each side
• Jaw opening for logs of up to 700 mm
• Lifts wood of up to 500 kg
• Sturdy construction
Available in 44 days, delivery time 2 - 3 days
• Claws with small hooks for secure grip
• Jaw opening for logs of up to 720 mm
• Lifts wood of up to 1500 kg
• Sturdy construction
Available in 44 days, delivery time 2 - 3 days
• For lifting, holding, rolling, transporting, pulling
• For logs up to ø 50 cm
• Long handle for higher leverage
• Suitable for soft and uneven surfaces