Urea Self Priming Delivery Pump 40l/min 230V/400W with Support Plate, AUS32
€225.99*
Prices incl. VAT plus Shipping costs
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Pump set for AdBlue®
• Special pump 230 V
• Max. flow rate 40 l/min - 400W
• Max. head 15 m
• Incl. base plate
• Incl. pump nozzle plastic
• Incl. hoses and connection pieces
This special liquid is a mixture consisting of 67.5 % demineralised water and 32.5 % pure urea. Due to this non-toxic additive, the limit values are maintained, however without affecting the efficiency and performance of the engine.
AdBlue® must not be filled into the diesel tank but the diesel vehicle has to be equipped with an additional tank especially for this liquid.
For an uncomplicated filling of AdBlue® from e.g. a IBC tank or barrel, the following solution is recommended:
The setconsisting of a self-priming diaphragm pump is mounted to a base plate. It has a manual plastic tap, 2 hoses with a plastic filter and various connection pieces.
The AdBlue® pump has a voltage of 230 volts. It has a delivery capacity of 40 litres per minute. Its suction head is 5 metres, the delivery head is 15 metres and the maximum working pressure is 2.8 bar.
The ergonomically shaped tap without automatic shutdown is manufactured from solid plastic. It has a stainless steel nozzle and is perfectly suited for AdBlue®.
The supplied black hoses are ONLY suitable for AdBlue®!
The device has got 1 inch hose connection pieces.
This special pump is well-suited for an uncomplicated use of AdBlue®. It is easy to handle and maintain. For a pure environment.
You can find the optional check valve with the article number 50637.
Legal note:
AdBlue® is an internationally registered trademark of the German Association of the Automotive Industry (VDA).
Ansaugtiefe: | 5 Meter |
---|---|
Anschlüsse: | 1 Zoll |
Druck: | max. 2.8 bar (40 psi) |
Eingangsleistung: | 400 Watt |
Leistungsaufnahme: | 400 W |
Maximale Motorleistung: | 2950 U/min |
Netzspannung/Frequenz (V~Hz): | 220–240 V / 50 Hz |
Produktart: | Harnstoffpumpe |
Schutzart (IP): | IP54 |
max. Förderhöhe: | 15 m |
Ersatzteile
Available, delivery time: 2 - 3 days
• Brass Check Valve
• Stainless Steel Strainer
Empfehlung: Pumpe AdBlue
Available, delivery time: 2 - 3 days
• Material foot valve brass tinned
• Material suction basket stainless steel
Available, delivery time: 2 - 3 days
• Automatic cut-off
• For AdBlue®
• 0-60 l/min
Available, delivery time: 2 - 3 days
• Made of plastic
• For AdBlue®
• 0-60 l/min
Available, delivery time: 2 - 3 days
• 230 V pin
• Max. pump rate 40l/min - 400W
• Max. head 15 m
• With base plate
Available, delivery time: 2 - 3 days
• Special pump 230 V
• Max. flow rate 40 l/min – 400 W
• Max. head 15 m
• Incl. base plate
• Incl. stainless steel tap
• Incl. hoses/connection pieces
Available, delivery time: 2 - 3 days
• Special pump 230 V
• Max. flow rate 40 l/min - 400W
• Max. head 15 m
• Incl. base plate
• Incl. pump nozzle plastic
• Incl. hoses and connection pieces
Available, delivery time: 2 - 3 days
• 230 V
• Flow rate 40 l/min - 400W
• Delivery head 15 m
Empfehlung: Pumpe Diesel 12-24V
Available, delivery time: 2 - 3 days
• Suitable for water and diesel oil
• Flow rate 12 l/min
• Motor speed 8700 rpm
• Outlet diameter of 16 mm
Available, delivery time: 2 - 3 days
• Suitable for water and diesel oil
• Flow rate 12 - 15 l/min
• Motor speed 8500 rpm
• Outlet diameter of 38 mm
Available, delivery time: 2 - 3 days
• Suitable for water and diesel oil
• Flow rate 12 l/min
• Motor speed 8700 rpm
• Incl. a big intake grille
Available, delivery time: 2 - 3 days
• Suction pump for oil in cars
• Oil change on suction probe
Available, delivery time: 2 - 3 days
• Self-priming
Available, delivery time: 2 - 3 days
• Self-priming
Available, delivery time: 2 - 3 days
• self•priming
• incl. flow meter with supporting frame
Available, delivery time: 2 - 3 days
• self-priming
Available, delivery time: 2 - 3 days
• self-priming
• incl. flow meter with supporting frame
Available, delivery time: 2 - 3 days
• self-priming
• incl. flow meter with supporting frame
Available, delivery time: 2 - 3 days
• self-priming
Available, delivery time: 2 - 3 days
• Motor performance 180 W
• Max. discharge head 12 m at 2 m suction
• Flow rate: 40l/min
• For diesel fuels and heating oils
Available, delivery time: 2 - 3 days
• 12V / 375 Watt
• Suction lift: 3 m
• Inclusive fittings, clamps & return valve
Available, delivery time: 2 - 3 days
• 12V / 550 Watt
• Suction lift: 3 m
• Inclusive fittings & clamps
Available, delivery time: 2 - 3 days
• Power: 96 W, 8500 U/min, Flow: 25 l/min
• Transfer height: 3 m, Ø hose connector: 19 mm
• 3 m cable
Available, delivery time: 2 - 3 days
• Fuel pump with max. 10 m delivery head
• Suction capacity of up to 3 m
• Efficient oil-extractor with 2400 l/h
• Not suitable for petrol, among others
Empfehlung: Pumpe Diesel 230V
Available, delivery time: 2 - 3 days
• Fuel nozzle for delivery pump
• 3/4 inch, 27mm, 60 l/min
Available, delivery time: 2 - 3 days
• Maximum flow rate volume 10-60 l/min
• Max. 3 bar
• For diesel, rape oil, fuel oil
Available, delivery time: 2 - 3 days
• maximum flow rate volume 19-120 l/min
Available, delivery time: 2 - 3 days
• Self-priming
• 230 V / 550 W
• 60 l/min
• Metal housing
• Flow meter
• Fuel nozzle
• Hoses
Available, delivery time: 2 - 3 days
• Suitable for Wiltec article 50748
• Suitable for Wiltec article 50591
• Suitable for Wiltec article 50958
• Suitable for Wiltec article 51486
Available, delivery time: 2 - 3 days
• Dimensions: 32 x 18 x 4.9 mm
• Compatible with Wiltec item no. 62137
Available, delivery time: 2 - 3 days
• Self-Priming
• Max. Delivery Height 30m
• By-Pass-Valve prevents overheating
Available, delivery time: 2 - 3 days
• Self-priming
• By-Pass-Valve prevents overheating
Available, delivery time: 2 - 3 days
• self-priming
• including counter with supporting frame
• By-Pass-Valve prevents overheating
Available, delivery time: 2 - 3 days
• Self-priming
• Including counter with supporting frame
Available, delivery time: 2 - 3 days
• self-priming
• including counter with supporting frame
• By-Pass-Valve prevents overheating
Available, delivery time: 2 - 3 days
• Self-priming
• Max. delivery height 25 m
• By-pass valve prevents overheating
Available, delivery time: 2 - 3 days
• Motor performance 375 W
• Max. discharge head 15 m at 2 m suction
• Flow rate: 60l/min
• For diesel fuels and heating oils
Available, delivery time: 2 - 3 days
• 230V - 50 Hz / 550 Watt
• Suction lift: 3 m
• Inclusive fittings, clamps & return valve
Available, delivery time: 2 - 3 days
• 230V - 50 Hz / 750 Watt
• Suction lift: 3 m
• Pumping head: 25 m
Available, delivery time: 2 - 3 days
• 230V - 50 Hz / 550 Watt
• Can be mounted to walls
• With counter mechanism, hose & fittings
• Pump nozzle with automated shutdown function
Available, delivery time: 2 - 3 days
Available, delivery time: 2 - 3 days
• For diesel and fuel oil pumps
Available, delivery time: 2 - 3 days
• For diesel pumps/
• Fuel oil pumps
• Height: 5mm
• Inner Ø 10mm
• Outer Ø 18mm
Available, delivery time: 2 - 3 days
• not self-priming
• Hose connection 25 mm (1″)
Available, delivery time: 2 - 3 days
• Self priming up to 2 m
• Hose connection 25 mm (1″)
• By-Pass-Valve prevents overheating