Wiltec Macerator Waste Pump 3 Inlets Toilet Shower Bath Dish Washer Sanitary
| Quantity | Unit price | Discount |
|---|---|---|
| From 1 |
€118.99*
|
|
| From 3 |
€112.86*
|
-5% |
Prices incl. VAT plus Shipping costs
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Macerator toilet pump
• Max. delivery height: 10 m
• Max. delivery width: 100 m
The pump can thereby for example simply be attached to the outflow of the toilet and still offers 2 additional inlets that can be connected to showers, bathtubs, washbasins, dishwashers or washing machines. Unused inlets can thereby easily be closed with the seals included in the scope of delivery.
The waste pump is powered by a powerful 600 watt engine, which ensures the shredding of sewage before it is then transported through a 32/40-mm pipe and enables the device to pump 200 litres per minute. While the silent engine will automatically start the pump for a short duration of time once a certain water level has been reached inside the tank, the device is further equipped with a control button allowing for the waste pump to be depleted manually. This Wiltec toilet waste pump does not require any specific treatment or maintenance aside from periodic descaling. The frequency is thereby reliant the hardness of the water in your area.
The relation of pumping head and draw:
Even though the maximum pumping head can reach a height of up to 10 m and the maximum draw a distance of up to 100 m, the overall pump capacity is dependent on the ratio of these two values. 1 metre of pumping head thereby equals 10 metres of draw, if assumed that the incline of the drain entrance equals 1%.
Pumping head: 5.5 m — Draw: 10 m
Pumping head: 4.5 m — Draw: 20 m
Pumping head: 3.5 m — Draw: 30 m
Pumping head: 2.5 m — Draw: 40 m
Pumping head: 1.5 m — Draw: 50 m
Pumping head: 0.5 m — Draw: 100 m
Devices installed in the basement in most cases have to cover a pumping head of a maximum of 4 metres, meaning that the waste pump would still be capable of covering a draw of 25 metres, which is usually more than just sufficient.
A few practical tips based on experience:
1. Return valve:
The return valve has to be installed at any cost and should be mounted as closely to the horizontal pipe as possible. A missing return valve would cause the sewage to flow back into the waste pump and thereby cause the engine to run permanently, which might eventually damage the device due to overheating.
2. Pipes:
Closely placing the rising pipe to the waste pump extends the longevity of the device as the same otherwise has to bear a lot more strain.
3. Piping:
The pump is equipped with a powerful engine that quickly creates high pressure levels. We therefore advise the use of either glued PVC pipes or copper pipes, both available at hardware stores and specialised retailers. If necessary, the rate of flow can be decreased by adding additional angles. The use of 2 separate 45° angles thereby does not obstruct the flow as much as a 90° angle would. Planning the piping in advance therefore would make things easier.
Please note that items aside from toilet paper are not supposed to end up in the toilet and should instead be put into the respective rubbish bin in order to be disposed of properly. Further, waste water must not be induced into the pump with pressure and washing machines and dish washers should therefore be induced via siphon or a washbasin.
We advise to entrust the installation as well as the leakage test to qualified personnel and to be aware of the legal regulations in order to avoid issues or errors.
Scope of delivery:
Note: Some of the accessories included in the delivery are located inside the waste pump
• 1x Toilet waste pump
• 1x Device front dummy plug
• 2x Feed pipe dummy plug
• 2x Non-return valve
• 8x Worm drive hose clip
• 1x Instruction manual
| Abmessungen: | 400 x 280 x 220 mm |
|---|---|
| Anschlussgröße: | 1 x DN100, 2 x DN40 |
| Anschlüsse: |
1 x WC-Anschlussmöglichkeit DN100 2 x DN40 |
| Eingangsleistung: | 600 Watt |
| Farbe: | weiß |
| Flow rate ( l/h ): | 12000 Liter |
| Geräuschpegel (dB(A)): | 45 dB(A) – 60 dB(A) |
| Kabellänge (m): | 1.7 Meter |
| Kabelquerschnitt (mm²): | 3 x 0,75 mm² |
| Kabeltyp: | H05VVH2-F |
| Leistungsaufnahme: | 600 W |
| Material: | Kunststoffgehäuse, Gummitank |
| Material Häcksler: | Edelstahl 304 |
| Max. temperature: | 90 °C |
| Min. temperature: | 2 °C |
| Netzspannung/Frequenz (V~Hz): | 220–240 V / 50 Hz |
| Produktart: | Hebeanlage |
| Schutzart (IP): | IPX4 |
| Schutzklasse (0,1,2,3): | I |
| Wicklungsmaterial: | Kupfer |
| max. Förderhöhe: | 5.5 m |
| max. Förderweite: | 100 Meter |
| präzise Produktart: | Kleinhebeanlage |
Ersatzteile
Available, delivery time: 2 - 3 days
• Macerator Waste Pump System
Available, delivery time: 2 - 3 days
• Wiltec 3/1 macerator Waste Pump
Available, delivery time: 2 - 3 days
• Macerator Waste Pump System
Available, delivery time: 2 - 3 days
• DN40 • Ø 40mm
Available, delivery time: 2 - 3 days
• Galvanized steel W2
• Width of the clamp: 9 mm
• Clamping range: 35-50 mm
Available, delivery time: 2 - 3 days
• Macerator Waste Pump System
Available, delivery time: 2 - 3 days
• Galvanized steel W4
• Width of the clamp: 9 mm
• Clamping range: 35-50 mm
Available, delivery time: 2 - 3 days
• DN40 – ø 45mm
Available, delivery time: 2 - 3 days
• Wiltec 3/1 macerator waste pump
• Voltage 230 V / 50 Hz
• Switching power max. 600 W
• Hose connector 5.3 mm
Available, delivery time: 2 - 3 days
• Macerator Waste Pump System
Empfehlung: Pumpe Toilettenhebeanlage
Available, delivery time: 2 - 3 days
• DN40 – ø 45mm
Available, delivery time: 2 - 3 days
• DN40 • Ø 40mm
Available, delivery time: 2 - 3 days
• Macerator Waste Pump System
Available, delivery time: 2 - 3 days
• Wiltec 3/1 macerator Waste Pump
Available, delivery time: 2 - 3 days
• Wiltec 3/1 macerator waste pump
• Voltage 230 V / 50 Hz
• Switching power max. 600 W
• Hose connector 5.3 mm
Available, delivery time: 2 - 3 days
• Macerator Waste Pump System
Available, delivery time: 2 - 3 days
• Macerator Waste Pump System
Available, delivery time: 2 - 3 days
• Macerator Waste Pump System
Available, delivery time: 2 - 3 days
• DN100 – ø 100 mm
Available, delivery time: 2 - 3 days
• Max. delivery height: 10 m
• Max. delivery width: 100 m
Available, delivery time: 2 - 3 days
• 450 W Power
• Max. delivery height 7.5 m
• Max. delivery width 75 m
Available, delivery time: 2 - 3 days
• 450 W Power
• max.delivery height 7.5 m
• max. delivery width 75 m
Available, delivery time: 2 - 3 days
• Max. pumping head 8.5 m
• Max. draw 85 m
• Flow rate 100 l/min
• 3x inlets and 1x outlet
Available, delivery time: 2 - 3 days
• Max. delivery height: 8,5 m
• Max. delivery width: 85 m
Available, delivery time: 2 - 3 days
• Max. draw 90 m
• 800-watt engine
• 4x inlet and 2x outlet
• Flow rate 170 l/min
Empfehlung: Werkzeug Sanitär
Available, delivery time: 2 - 3 days
• Made of chromium-molybdenum alloy steel
• Soil pipe cutter for tubes from Ø 19 mm to 80 mm
• Cutting tool for steel, copper and plastic pipes
• Equipped with wing screw for adjustment
Available, delivery time: 2 - 3 days
• Die sizes: Ø16 mm / Ø20 mm / Ø26 mm / Ø32 mm
• Extendable handles
• Size: 63 x 24 x 9 cm
• Weight: 6.2 kg
Available, delivery time: 2 - 3 days
• 2000 watts
• Max. 300 ° C
• 7 adapters
• Incl. accessories
Available, delivery time: 2 - 3 days
• 6 dies
• Durable
• Malleable cast iron / steel
• Weight: approx. 6kg
Available, delivery time: 2 - 3 days
• About 5 l filling rate
• Pressure tube with ½″ thread
• Test pressure up to 25 bar
• Weight 2 kg
Available, delivery time: 2 - 3 days
• 4 BSPT cutters Ø 20.96 – 41.91mm (R ½ - 1 1/4")
• Manual tools with handy ratchet extension
• Useful carrying case for transport and storage
• Made of robust and durable steel for clean cuts
Empfehlung: Schlauch Drahtschellen
Available, delivery time: 2 - 3 days
• Zinc-plated
• Easy installation
• Diameter from 27 to 31 mm
• Reliable hold
Available, delivery time: 2 - 3 days
• Stainless steel
• Clamp width: 26 mm
• Clamping range: 240-252 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 22 mm
• Clamping range: 48-51 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 24 mm
• Clamping range: 74-79 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 24 mm
• Clamping range: 80-85 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 24 mm
• Clamping range: 86-91 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 24 mm
• Clamping range: 104-112 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 26 mm
• Clamping range: 131-139 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 26 mm
• Clamping range: 175-187 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 26 mm
• Clamping range: 201-213 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 26 mm
• Clamping range: 214-226 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 26 mm
• Clamping range: 227-239 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 18 mm
• Clamping range: 20-22 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 20 mm
• Clamping range: 34-37 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 24 mm
• Clamping range: 110-118 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 24 mm
• Clamping range: 76-80 mm
Available, delivery time: 2 - 3 days
• Galvanized steel
• Clamp width: 26 mm
• Clamping range: 195-210 mm
Available, delivery time: 2 - 3 days
• Stainless steel
• Clamp width: 24 mm
• Clamping range: 110-118 mm
Available, delivery time: 2 - 3 days
• Stainless steel
• Clamp width: 18 mm
• Clamping range: 17-19 mm
Available, delivery time: 2 - 3 days
• Stainless steel
• Clamp width: 26 mm
• Clamping range: 195-210 mm
Available, delivery time: 2 - 3 days
• Stainless steel
• Clamp width: 24 mm
• Clamping range: 98-103 mm
Available, delivery time: 2 - 3 days
• Stainless steel
• Clamp width: 18 mm
• Clamping range: 23-25 mm
Available, delivery time: 2 - 3 days
• Stainless steel
• Clamp width: 18 mm
• Clamping range: 26-28 mm
Available, delivery time: 2 - 3 days
• Stainless steel
• Clamp width: 20 mm
• Clamping range: 29-31 mm