LIFAN gasoline waterpump 9m³/h 20m 1.4kW (2.5HP) 2" (50mm) gardenpump
145,99 €*
Ceny zawierają podatek VAT + Koszty wysyłki
Nie jest już dostępny
• Gasoline water pump
• Suction height: 4 m max.
• Delivery height: 20 m max.
• OHV, gasoline engine
• 4-stroke, single cylinder, air-cooled
• Manufacturer: LIFAN
Gasoline waterpumps are an independent alternative. This specific kind of garden pump is operated by gasoline and not dependent on a power source. Gasoline waterpumps operate with a 4-stroke engine , being powered by gasoline and motor oil.
They are characterized by their high capacity, thus providing for an easy irrigation large green areas or to empty a pond. Overflowed pits or cellars can be emptied quickly and independently by a powerful gasoline waterpump. By this means it becomes an important help as for flooding or emergency drainage. Even for irrigation of remote areas that are cut off from access to the power supply, a waterpump operated by gasoline can be useful and promote water from wells.
This gasoline waterpump can be perfectly used in the case of flooding or concerning garden works.
The technique of waterpumps is extremely high, the plug connector, for example is made of metal and not of plastic. The motor has a low oil switch and has been approved by the manufacturer for the new E10 fuel.
The impeller is made of metal, the housing is made from light metal. Due to an extremely solid metal tube frame along with rubber feet, the pump has a secure stand.
The pump body is easy to remove, thus ensuring a quick cleaning and maintenance.
This waterpump can be used for the irrigation of green areas, flower beds and entire garden areas.
Using the supplied strainer you can extract water from wells, cisterns, ponds, rivers and streams without any problem.
• internal check valve
• simple access to impeller & diffuser
• simple speed control of the pump engine
• easy hose assembly by well-designed couplings
• easy, clean and quick drainage of the pump body by sealing plugs in the pump housing
ABOUT LIFAN
The Chongqing Lifan Industry (Group) Co. Ltd. was founded in 1992. it is one of the largest private companies in China. The Lifan Group has grown rapidly and has developed into a diversified corporation with particular focus on modern technology with production and distribution of passenger cars, buses and trucks, motorcycles and engines.
Lifan Motorcycle was awarded the title "Chinese Top Trademark" by the Promotion Committee from the National Office for Quality and Technical Supervision. In January 2006 Lifan was ranked 78 from 100 economically most powerful companies in China and occupied the 6th place in the vehicle sector. Lifan's Technology Center was ranked seven. Lifan employs more than 13.000 people in Chongqing, a region with 35.000.000 inhabitants, situated in the centre of China and has over 4500 patents. Chongqing is considered to be the center of the technical improvements to engines.
In 2002 the passenger car Lifan 520 was launched on the market and in 2003 the first trucks have rolled off the production lines. With their own production lines: cutting, welding, painting and assembly a number of 150.000 units per year was achieved, and a Vehicle Academy was set up.
Since 2011 WilTec Wildanger Technik GmbH has been the sole distributor for Lifan industry engines in Germany and Europe.
SUPPLIERS DECLARATION for engine components as per the Machinery Directive:
This engine is slated for being installed in a machine.The machine in which the engine is to be mounted, cannot be started till it has been established, that this machine complies with the terms of the Machine Directive.
In case of disregard of this reference WilTec Wildanger Technik GmbH cannot be held responsible for any damages or defects. WilTec Wildanger Technik GmbH diclaims any liability for possible damages, since we have no influence on the installing, using and safety of the machine.
Beware!
The article is delivered WITHOUT fuel (without oil or petrol!)
Before starting the engine for the first time fill in oil/petrol!
Ansaugtiefe: | 4 Meter |
---|---|
Maximale Motorleistung: | 2.5 PS / 1.4kW bei 3600 U/min |
Produktart: | Benzin-Wasserpumpe |
Selbstaktivierungszeit (s/4m): | 120 |
max. Förderhöhe: | 20 m |
Ersatzteile
Aktualnie niedostępne
• Air filter with Housing
Empfehlung: Pumpe Schmutzwasser Benzin
Aktualnie niedostępne
• Max. suction head: 8m
• Max. head: 30m
• OHV, Petrol Gasoline engine:
• 4-stroke, 1 Cylinder, air cooled
• Producer: LIFAN
Aktualnie niedostępne
• Suction head: 8m max.
• Delivery head: 36m max.
• OHV, gasoline engine
• 4-stroke, single cylinder, air-cooled
• Manufacturer: LIFAN
Aktualnie niedostępne
• Suction head: 8m max.
• Delivery head: 30m max.
• OHV, gasoline engine
• 4-stroke, single cylinder, air-cooled
• Manufacturer: LIFAN
Aktualnie niedostępne
• Suction height: 4 m max.
• Delivery height: 20 m max.
• OHV, gasoline engine
• 4-stroke, single cylinder, air-cooled
• Manufacturer: LIFAN
Aktualnie niedostępne
• Moc: 1 kW przy 6500 obr./min
• Silnik benzynowy 4-suwowy
• Wysokość podnoszenia: 8 m
• Przepływ 8.000 l/h (8 m³/h)
Aktualnie niedostępne
• Moc: 4 kW przy 3600 obr./min
• Silnik benzynowy 4-suwowy
• Do 8 m głębokości zanurzenia
• Przepływ: 48.000 l/h (48 m³/h)
Aktualnie niedostępne
• 25,4-mm hose connection (1″)
• Max. suction height: 8 m
• Max. lifting height: 30 m
• Petrol-operated with 1.2-l tank
Aktualnie niedostępne
• 38,1-mm hose connection (1.5″)
• Max. suction height: 8 m
• Max. lifting height: 35 m
• Petrol-operated with 1.2-l tank
Empfehlung: Pumpe Schmutzwasser Elektrisch
Aktualnie niedostępne
• For emptying flooded basements, ponds, pools etc
• Maximum delivery rate of 16,000 litres per hour
• Maximum pumping head of 10 metres
• 20 m water hose with a diameter of 50.8 mm
Aktualnie niedostępne
• With male thread 88 mm DN80 (G3")
• Suitable for sewage pump (50989)
Aktualnie niedostępne
• For pools, cellars, ponds, etc.
• Max. extraction: 15,000 l/h
• Discharge head: max. 10 metres
• Including 20 m hose
Aktualnie niedostępne
• Capable of handling pollutants up to Ø 5 mm
• Power output: 550 W
• Max. pumping head: 9 m
• Flow rate: 12,000 litres per hour
Aktualnie niedostępne
• Capable of handling pollutants up to Ø 5 mm
• Power output: 750 W
• Max. pumping head: 8.5 m
• Flow rate: 12500 litres per hour
Aktualnie niedostępne
• Takes foreign particles of up to ⌀ 35 mm in
• Power output 750 W
• Max. discharge head 7.5 m
• Flow rate 13000 l/h
Aktualnie niedostępne
• Takes foreign particles of up to ⌀ 35 mm in
• Power output 750 W
• Max. discharge head 8 m
• Flow rate 13,000 l/h
Aktualnie niedostępne
• Capable of handling pollutants up to Ø 35 mm
• Power output: 750 W
• Max. pumping head: 9 m
• Flow rate: 13,000 litres per hour
Aktualnie niedostępne
• Capable of handling pollutants up to Ø 5 mm
• Power output: 900 W
• Max. pumping head: 11.5 m
• Flow rate: 14,000 litres per hour
Aktualnie niedostępne
• Capable of handling pollutants up to Ø 35 mm
• Power output: 1,100 W
• Max. pumping head: 11 m
• Flow rate: 15,000 litres per hour
Aktualnie niedostępne
• Takes foreign particles of up to ⌀ 35 mm in
• Power output 1100 W
• Max. discharge head 11 m
• Flow rate 15,000 l/h
Aktualnie niedostępne
• For pools, cellars, ponds, etc.
• Max. extraction: 1,500 l/h
• Discharge head: max. 16 metres
• Including 20 m hose
Aktualnie niedostępne
• max. 7500 L / h
• impurity size: max. 35 mm
• robust plastic shell
• easy to transport
Aktualnie niedostępne
• For pools, cellars, ponds, etc.
• Max. extraction: 10,000 l/h
• Discharge head: max. 8 metres
• Including 20 m hose
Aktualnie niedostępne
• Capable of handling pollutants up to Ø 5 mm
• Power output: 250 W
• Max. pumping head: 5.5 m
• Flow rate: 6000 litres per hour
Aktualnie niedostępne
• Capable of handling pollutants up to Ø 5 mm
• Power output: 400 W
• Max. pumping head: 7.5 m
• Flow rate: 7000 litres per hour
Aktualnie niedostępne
• Capable of handling pollutants up to Ø 5 mm
• Power output: 400 W
• Max. pumping head: 7.5 m
• Flow rate: 7,000 litres per hour
Aktualnie niedostępne
• max. 12500 L / h
• impurity size: max. 35 mm
• robust plastic shell
• easy to transport
Aktualnie niedostępne
• Takes foreign particles of up to ⌀ 35 mm in
• Power output 400 W
• Max. discharge head 5 m
• Flow rate 7,500 l/h
Aktualnie niedostępne
• Capable of handling pollutants up to Ø 35 mm
• Power output: 400 W
• Max. pumping head: 5 m
• Flow rate: 7,500 litres per hour
Aktualnie niedostępne
• With chaff cutter for excrements, pond mud etc..
• 312000l/h for quick result
• powerful and energy-efficient
Aktualnie niedostępne
• For pools, cellars, ponds, etc.
• Max. extraction: 10,000 l/h
• Discharge head: max. 8 metres
• Including 20 m hose
Aktualnie niedostępne
• max. 15000 L / h
• impurity size: max. 35 mm
• robust plastic shell
• easy to transport
Aktualnie niedostępne
• max. 10500 L / h
• impurity size: max. 35 mm
• robust plastic shell
• easy to transport
Empfehlung: Schlauch Kupplungen Storz Schlauch
Aktualnie niedostępne
• 10 metres length, 25 mm diameter
• Equipped with D-Storz coupling
• Operating pressure 10 bar, burst pressure 30 bar
• Suitable temperature range - 20°C to + 65°C
Treść: 10 metre(s) (2,30 €* / 1 metre(s))
Aktualnie niedostępne
• 10 metres length, 51 mm diameter
• Equipped with C-Storz coupling
• Operating pressure 10 bar, burst pressure 30 bar
• Suitable temperature range - 20°C to + 65°C
Treść: 10 metre(s) (2,90 €* / 1 metre(s))
Aktualnie niedostępne
• 10 metres length, 76 mm diameter
• Equipped with B-Storz coupling
• Operating pressure 10 bar, burst pressure 30 bar
• Suitable temperature range - 20°C to + 65°C
Treść: 10 metre(s) (4,00 €* / 1 metre(s))
Aktualnie niedostępne
• 20 metres length, 25 mm diameter
• Equipped with D-Storz coupling
• Operating pressure 10 bar, burst pressure 30 bar
• Suitable temperature range - 20°C to + 65°C
Treść: 20 metre(s) (1,72 €* / 1 metre(s))
Aktualnie niedostępne
• 20 metres length, 51 mm diameter
• Equipped with C-Storz coupling
• Operating pressure 10 bar, burst pressure 30 bar
• Suitable temperature range - 20°C to + 65°C
Treść: 20 metre(s) (2,05 €* / 1 metre(s))
Aktualnie niedostępne
• 20 metres length, 76 mm diameter
• Equipped with B-Storz coupling
• Operating pressure 10 bar, burst pressure 30 bar
• Suitable temperature range - 20°C to + 65°C
Treść: 20 metre(s) (2,71 €* / 1 metre(s))