100L INOX / Stainless Steel Pressure Tank Vessel Expansion Domestic Waterworks Pump EPDM-Membrane
€234.99*
Prices incl. VAT plus Shipping costs
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Stainless steel pressure vessel holds 100 litres
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Vertical mounting
This pressure vessel (type 100LV SS) will be delivered including the EPDM rubber membrane. The vessel is designed for a maximum pressure of 5.4 bar and will be delivered for a vertical positioning. The vessel is checked for tightness with up to 5.4 bar water pressure by the producer.
It has a 32.89–33.25-mm (1″) pump connector. The pressure vessel additionally has an integrated valve (Schrader valve/car tyre valve) to regulate the counter-pressure in the space between tank and membrane.
These vessels are made of quality-steel sheets and are welded according to UNI-EN standards and equipped with a heat and ageing resistant EPDM rubber membrane. The membrane can easily be exchanged.
About ethylene propylene diene monomer rubber:
The EPDM rubber belongs to the group of elastomers. This synthetic material is resistant to hot air, weathering, and ozone. The elastomer shows low gas permeability, good resistance to chemicals as well as up to 100 °C heat. Additionally, it is very good noise and shock energy absorption qualities.
In the low temperature range, the rubber remains elastic up to −70 °C. It is mainly used for air hoses and inner cores of tyres, bladders, steam hoses, and linings for tanks. Further fields of application are foils, membranes, non-vulcanised sealants and bands.
About the pre-charge in the pressurised vessel:
The pre-charge pressure should be set approximately 0.1–0.2 bar lower than the switch-on pressure of the pump and has to be checked regularly. Any failure of observance may cause damage on the EPDM rubber diaphragm of the pressure vessel.
A more accurate calculation results from the formula “switch-on pressure of the pump x 0.9.” Example: Switch-on pressure of the pressure switch of the domestic waterworks is set to 1.5 bar: 1.5 bar x 0.9 = 1.35 bar. This means that the pressure can be set from 1.3–1.4 bar.
Important: The pressure of the vessel should only be inflated or deflated after the pressure to the water system has been released beforehand.
Attention: It is necessary to have released the air and water pressure before opening of the pressure vessel!
Betriebsdruck: | 5.4 Bar |
---|---|
Druck: |
5,4 bar Wasserdruck Luftdruck 1.8 / N2-Vordruck: ca. 2 bar |
Farbe: | grau |
Fassungsvermögen in Liter: | 100 Liter |
Luftdruck: | 1.8 Bar |
Material: | Edelstahl 304 |
Material Membran: | Ethylen-Propylen-Dien-Kautschuk (EPDM) |
Materialstärke: | 1 Millimeter |
Max. temperature: | 99 °C |
Membran: | EPDM (auswechselbar) |
Min. temperature: | 4 °C |
Produktart: | Hauswasserwerk |
Stickstoff Vordruck: | 2 Bar |
max. Druck (bar): | 5.6 Bar |
präzise Produktart: | Membrankessel |
Ersatzteile
Available, delivery time: 2 - 3 days
• For 24-100 Liter Pressure Vessels
Available, delivery time: 2 - 3 days
• for 24-100 Liter Pressure Vessels
• Material: Stainless Steel
Available, delivery time: 2 - 3 days
• For 24-100 Liter Pressure Vessels
Available, delivery time: 2 - 3 days
• for 24-100 Liter Pressure Vessels
Available, delivery time: 2 - 3 days
• 1x 32,89 mm (1″) ET
• 1x 12,91 mm (¼″) ET
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• For 24-100 Liter Pressure Vessels
Available, delivery time: 2 - 3 days
• For pressure tank vessel
• Expansion for domestic waterworks
Available, delivery time: 2 - 3 days
• For 24 – 100 litre pressure vessels
• Outer thread ⌀ ½ inch and ⌀ ⅜ inch
• Inner thread ⌀ ⅜ inch and ⌀ ¼ inch
• Space-saving and durable
Available, delivery time: 2 - 3 days
• for 24-100 Liter Pressure Vessels
Available, delivery time: 2 - 3 days
• For 24–100 litre pressure vessels
• Outer thread ⌀ 1 inch (32.89 mm)
• Inner thread ⌀ ⅜ inch (16.41 mm)
• Space-saving and durable
Available, delivery time: 2 - 3 days
• For 24-100 Liter Pressure Vessels
Empfehlung: Membrankessel
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Horizontal with pump attachment plate
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Vertical mounting
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Vertical mounting
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• Diameter holes: 9 x 20 mm
• Hole spacing long: 315 x 255 mm
• EPDM rubber membrane
• Membrane boiler for domestic waterworks
• Horizontal with pump attachment plate
Available, delivery time: 2 - 3 days
• 32,89 mm (1") thread connection
• Membrane included
• For Domestic waterworks
• Horizontal with pump-fixation
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM membrane
• For domestic waterworks
• Horizontal with pump fixation
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Vertical mounting
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Horizontal with pump attachment plate
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber thread
• For domestic waterworks
• Vertical mounting
Available, delivery time: 2 - 3 days
• 32.89 mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Horizontal with pump attachment plate
Empfehlung: Pumpe Hauswasserwerk
Available, delivery time: 2 - 3 days
• Output: 1100 W
• Built-in filter unit
• Extra large inlet
• 32.89 mm (G1") connection
Available, delivery time: 2 - 3 days
• Output: 1200 W
• Pressure gauge
• Built-in pressure switch
• 19 l pressure tank volume
Available, delivery time: 2 - 3 days
• Output: 1200 W
• 19 L pressure tank volume
• Pressure gauge
• Built-in pressure switch
Available, delivery time: 2 - 3 days
• Output: 1300 W
• Built-in filter and pressure gauge
• Integrated pressure switch
• 19 L pressure tank volume
Available, delivery time: 2 - 3 days
• Makes rainwater available for house and garden
• Handle for comfortable transportation
• Built-in filter and pressure gauge
• Built-in pressure switch
Available, delivery time: 2 - 3 days
• Max. Suction Height 7 m
• Max. Delivery Head: 46 m
• with Pump Control SK-13
Available, delivery time: 2 - 3 days
• Max. Suction Height 7 m
• Max. Delivery Head: 45 m
• with Pump Control SK-13
Available, delivery time: 2 - 3 days
• Max. Suction Height 8 m
• Max. Delivery Head: 50 m
Available, delivery time: 2 - 3 days
• For fresh, clear and well water
• 600 W power output
• Max. discharge head 35 m
• Flow rate 2800 litres per hour
Available, delivery time: 2 - 3 days
• For fresh, clear and well water
• 600 W power output
• Max. discharge head 35 m
• Flow rate 2800 litres per hour
Available, delivery time: 2 - 3 days
• For fresh, clear and well water
• 1200 W power output
• Max. discharge head 48 m
• Flow rate 3800 litres per hour
Available, delivery time: 2 - 3 days
• For fresh, clear and well water
• 1200 W power output
• Max. discharge head 48 m
• Flow rate 3800 litres per hour
Available, delivery time: 2 - 3 days
• Power consumption 3200 l/h
• Delivery head 38 m
• Suction head 8 m
• Power 800 watts
• Thermal protection
• Thread 1 inch
Available, delivery time: 2 - 3 days
• Max. Suction Height 7 m
• Max. Delivery Head: 46 m
Available, delivery time: 2 - 3 days
• Flowrate up to 2800 l/h
• With manometer and pressure switch
• Pumps rainwater, process water and groundwater
• Reduces the energy consumption
Available, delivery time: 2 - 3 days
• Flowrate up to 3000 l/h
• With manometer and pressure switch
• Pumps rainwater, process water and groundwater
• Reduces the energy consumption
Empfehlung: Membrankessel Zubehör
Available, delivery time: 2 - 3 days
• 1x 32,89mm (1") ET
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• 1x 32,89 mm (1″) ET
• 1x 12,91 mm (¼″) FT
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• 1x 32,89 mm (1″) ET
• 1x 12,91 mm (¼″) ET
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• 1x 32,89mm (1") ET
• 1x 12,91mm (1/4") FT
• 1x 12,91mm (1/4") ET
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• 0-10 bar resp. 0-140 PSI
• Ø 50mm Pressure Gauge axial
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• 0-12 bar resp. 0-180 PSI
• Ø 50mm Pressure Gauge axial
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• 0-12 bar resp. 0-170 PSI
• Ø 50mm Pressure Gauge radial
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• 0–12 bar resp. 0–170 PSI
• ø 50 mm Pressure Gauge radial
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• DN25 33,7mm (1 Inch) Female Thread
• DN25 33,7mm (1 Inch) Male Thread
• Braided with stainless steel
• E.g. Pressure vessels in domestic waterworks
Content: 0.5 metre(s) (€27.98* / 1 metre(s))
Available, delivery time: 2 - 3 days
• 32.89 mm (G1″) IT & 32.89 mm (G1″) ET
• Braided with stainless steel
• E.g. Pressure vessels in domestic waterworks
Available, delivery time: 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Content: 0.3 metre(s) (€21.63* / 1 metre(s))
Available, delivery time: 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Content: 0.6 metre(s) (€19.42* / 1 metre(s))
Available, delivery time: 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Content: 0.7 metre(s) (€22.84* / 1 metre(s))
Available, delivery time: 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Content: 0.8 metre(s) (€21.24* / 1 metre(s))
Available, delivery time: 2 - 3 days
• 1/2″ male thread (20.95 mm) and 1/2″ union nut (18.64 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 1/2″ union nut (18.64 mm) and 3/4″ union nut (24.12 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 3/4″ male thread (26.44 mm) and 1/2″ union nut (18.64 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 3/4″ union nut (24.12 mm) and 1/2″ male thread (20.95 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 3/4″ union nut with elbow (24.12 mm) and 1/2″ male thread (20.95 mm)
• Connection hose with DN13 and 1000 mm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 3/4″ union nut with elbow (24.12 mm) and 1/2″ union nut (18.64 mm)
• Connection hose with DN13 and 1000 mm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 3/4″ union nut with elbow (24.12 mm) and 3/4″ union nut (24.12 mm)
• Connection hose with DN13 and 1000 mm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 2 connections: 1/2″ union nut (UN) (18.64 mm)
• Connection hose with 13DN inner diameter and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 3/4″ union nut (24.12 mm) and 3/4″ male thread (26.44 mm)
• Connection hose with DN19 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 2 connections: 3/4″ union nut (UN) (24.12 mm)
• Connection hose with 19DN inner diameter and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate