24L INOX PRESSURE TANK Vessel WATER Natural Rubber Domestic Waterworks Stainless Steel
€54.99*
Prices incl. VAT plus Shipping costs
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Pressure vessel stainless steel 24 litres
• 32,89 mm (1") thread connection
• Membrane included
• For Domestic waterworks
• Horizontal with pump-fixation
This pressure vessel will be delivered with membrane and has a 24 L capacity. The vessel is designed for a maximum pressure of 5,4 bar and will be delivered in a horizontal position. The tank is checked for tightness with up to 5,4 bar water pressure by the producer.
It has a 1 inch (32,89–33,25 mm) pump connector. Additionally, the pressure vessel has an integrated valve (comparable to a car tyre valve) to control or regulate the back pressure for the membrane.
This vessel series is welded of qualitative steel sheet, according to UNI-EN-standards, and equipped with a heat- and age resistant membrane.
About the primary pressure in the pressure vessel:
The primary pressure should be set approximately 0,1–0,2 bar lower than the switch-on pressure of the pump and has to be checked at regular intervals. Any failure of observance may cause damage on the membrane of the pressure vessel. A more accurate calculation results from the switch-on pressure of the pump x 0,9. Example: switch-on pressure on the pressure switch of the domestic waterworks is set to 1,5 bar: 1,5 bar x 0,9 = 1,3–1,4 bar.
Important:
The pressure of the vessel should only be inflated or deflated after the pressure to the water system has been released.
Attention:
It is absolutely necessary to have released the air and water pressure before the opening of the pressure vessel!
| Abmessungen: | 267 x 680 x 290 mm |
|---|---|
| Betriebsdruck: | 5.4 Bar |
| Druck: |
5,4 bar Wasserdruck Luftdruck 1,8 / N2-Vordruck: ca. 2 bar |
| Farbe: | grau |
| Fassungsvermögen in Liter: | 24 Liter |
| Luftdruck: | 1.8 Bar |
| Material: | Edelstahl 304 |
| Material Membran: | Ethylen-Propylen-Dien-Kautschuk (EPDM) |
| Materialstärke: | 1 Millimeter |
| Max. temperature: | 99 °C |
| Membran: | EPDM |
| Min. temperature: | 4 °C |
| Produktart: | Hauswasserwerk |
| Stickstoff Vordruck: | 2 Bar |
| max. Druck (bar): | 5.6 Bar |
| präzise Produktart: | Membrankessel |
Ersatzteile
Available, delivery time: 2 - 3 days
• For 24-100 Liter Pressure Vessels
Available, delivery time: 2 - 3 days
• For 24-100 Liter Pressure Vessels
Available, delivery time: 2 - 3 days
• for 24-100 Liter Pressure Vessels
Available, delivery time: 2 - 3 days
• For pressure tank vessel
• Expansion for domestic waterworks
Available, delivery time: 2 - 3 days
• for 24-100 Liter Pressure Vessels
Available, delivery time: 2 - 3 days
• For 24 – 100 litre pressure vessels
• Outer thread ⌀ ½ inch and ⌀ ⅜ inch
• Inner thread ⌀ ⅜ inch and ⌀ ¼ inch
• Space-saving and durable
Available, delivery time: 2 - 3 days
• For 24-100 Liter Pressure Vessels
Available, delivery time: 2 - 3 days
• For 24-100 Liter Pressure Vessels
Available, delivery time: 2 - 3 days
• for Pressure Tank Vessel
• Expansion for Domestic Waterworks
• with flap for mounting valve
Available, delivery time: 2 - 3 days
• For pressure tank vessel
• Expansion for domestic waterworks
Available, delivery time: 2 - 3 days
• for 24-100 Liter Pressure Vessels
• Material: Stainless Steel
Available, delivery time: 2 - 3 days
• For 24–100 litre pressure vessels
• Outer thread ⌀ 1 inch (32.89 mm)
• Inner thread ⌀ ⅜ inch (16.41 mm)
• Space-saving and durable
Empfehlung: Membrankessel
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Horizontal with pump attachment plate
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Vertical mounting
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Vertical mounting
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• Diameter holes: 9 x 20 mm
• Hole spacing long: 315 x 255 mm
• EPDM rubber membrane
• Membrane boiler for domestic waterworks
• Horizontal with pump attachment plate
Available, delivery time: 2 - 3 days
• 32,89 mm (1") thread connection
• Membrane included
• For Domestic waterworks
• Horizontal with pump-fixation
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM membrane
• For domestic waterworks
• Horizontal with pump fixation
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Vertical mounting
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Horizontal with pump attachment plate
Available, delivery time: 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber thread
• For domestic waterworks
• Vertical mounting
Available, delivery time: 2 - 3 days
• 32.89 mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Horizontal with pump attachment plate
Empfehlung: Pumpe Hauswasserwerk
Available, delivery time: 2 - 3 days
• Output: 1100 W
• Built-in filter unit
• Extra large inlet
• 32.89 mm (G1") connection
Available, delivery time: 2 - 3 days
• Output: 1200 W
• Pressure gauge
• Built-in pressure switch
• 19 l pressure tank volume
Available, delivery time: 2 - 3 days
• Output: 1200 W
• 19 L pressure tank volume
• Pressure gauge
• Built-in pressure switch
Available, delivery time: 2 - 3 days
• Output: 1300 W
• Built-in filter and pressure gauge
• Integrated pressure switch
• 19 L pressure tank volume
Available, delivery time: 2 - 3 days
• Makes rainwater available for house and garden
• Handle for comfortable transportation
• Built-in filter and pressure gauge
• Built-in pressure switch
Available, delivery time: 2 - 3 days
• Max. Suction Height 7 m
• Max. Delivery Head: 46 m
• with Pump Control SK-13
Available, delivery time: 2 - 3 days
• Max. Suction Height 7 m
• Max. Delivery Head: 45 m
• with Pump Control SK-13
Available, delivery time: 2 - 3 days
• Max. Suction Height 8 m
• Max. Delivery Head: 50 m
Available, delivery time: 2 - 3 days
• For fresh, clear and well water
• 600 W power output
• Max. discharge head 35 m
• Flow rate 2800 litres per hour
Available, delivery time: 2 - 3 days
• For fresh, clear and well water
• 600 W power output
• Max. discharge head 35 m
• Flow rate 2800 litres per hour
Available, delivery time: 2 - 3 days
• For fresh, clear and well water
• 1200 W power output
• Max. discharge head 48 m
• Flow rate 3800 litres per hour
Available, delivery time: 2 - 3 days
• For fresh, clear and well water
• 1200 W power output
• Max. discharge head 48 m
• Flow rate 3800 litres per hour
Available, delivery time: 2 - 3 days
• Power consumption 3200 l/h
• Delivery head 38 m
• Suction head 8 m
• Power 800 watts
• Thermal protection
• Thread 1 inch
Available, delivery time: 2 - 3 days
• Max. Suction Height 7 m
• Max. Delivery Head: 46 m
Available, delivery time: 2 - 3 days
• Flowrate up to 2800 l/h
• With manometer and pressure switch
• Pumps rainwater, process water and groundwater
• Reduces the energy consumption
Available, delivery time: 2 - 3 days
• Flowrate up to 3000 l/h
• With manometer and pressure switch
• Pumps rainwater, process water and groundwater
• Reduces the energy consumption
Empfehlung: Membrankessel Zubehör
Available, delivery time: 2 - 3 days
• 1x 32,89mm (1") ET
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• 1x 32,89 mm (1″) ET
• 1x 12,91 mm (¼″) FT
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• 1x 32,89 mm (1″) ET
• 1x 12,91 mm (¼″) ET
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• 1x 32,89mm (1") ET
• 1x 12,91mm (1/4") FT
• 1x 12,91mm (1/4") ET
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• 0-10 bar resp. 0-140 PSI
• Ø 50mm Pressure Gauge axial
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• 0-12 bar resp. 0-180 PSI
• Ø 50mm Pressure Gauge axial
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• 0-12 bar resp. 0-170 PSI
• Ø 50mm Pressure Gauge radial
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• 0–12 bar resp. 0–170 PSI
• ø 50 mm Pressure Gauge radial
• i.E. Domestic Waterworks, Pressure Vessels
Available, delivery time: 2 - 3 days
• DN25 33,7mm (1 Inch) Female Thread
• DN25 33,7mm (1 Inch) Male Thread
• Braided with stainless steel
• E.g. Pressure vessels in domestic waterworks
Content: 0.5 metre(s) (€27.98* / 1 metre(s))
Available, delivery time: 2 - 3 days
• 32.89 mm (G1″) IT & 32.89 mm (G1″) ET
• Braided with stainless steel
• E.g. Pressure vessels in domestic waterworks
Available, delivery time: 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Content: 0.3 metre(s) (€21.63* / 1 metre(s))
Available, delivery time: 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Content: 0.6 metre(s) (€19.42* / 1 metre(s))
Available, delivery time: 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Content: 0.7 metre(s) (€22.84* / 1 metre(s))
Available, delivery time: 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Content: 0.8 metre(s) (€21.24* / 1 metre(s))
Available, delivery time: 2 - 3 days
• 1/2″ male thread (20.95 mm) and 1/2″ union nut (18.64 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 1/2″ union nut (18.64 mm) and 3/4″ union nut (24.12 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 3/4″ male thread (26.44 mm) and 1/2″ union nut (18.64 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 3/4″ union nut (24.12 mm) and 1/2″ male thread (20.95 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 3/4″ union nut with elbow (24.12 mm) and 1/2″ male thread (20.95 mm)
• Connection hose with DN13 and 1000 mm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 3/4″ union nut with elbow (24.12 mm) and 1/2″ union nut (18.64 mm)
• Connection hose with DN13 and 1000 mm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 3/4″ union nut with elbow (24.12 mm) and 3/4″ union nut (24.12 mm)
• Connection hose with DN13 and 1000 mm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 2 connections: 1/2″ union nut (UN) (18.64 mm)
• Connection hose with 13DN inner diameter and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 3/4″ union nut (24.12 mm) and 3/4″ male thread (26.44 mm)
• Connection hose with DN19 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Available, delivery time: 2 - 3 days
• 2 connections: 3/4″ union nut (UN) (24.12 mm)
• Connection hose with 19DN inner diameter and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate