H-Tronic Inrush Current Limiter SCL 3680 Overvoltage-protection Adaptor Adapter
€25.49*
Prices incl. VAT plus Shipping costs
No longer available
• Inrush current limiter for avoiding overvoltage when switching on a powerful divice
• Reduces the switch-on load peaks
• For angle grinders, circular saws, compressors, pumps, drills, etc.
• Max. 16 A nominal voltage, max. 3680 W nominal power
• Suitable for circuits with 16 A fuse protection
We then talk about the switch-on current or inrush current, the current flowing immediately after switching on of a powerful device. This current, being many times higher than the nominal voltage, charges the mains and all end-use customers at the same time. During this, a fuse or protection switch might be triggered, or even the entire system might be overcharged. The H-Tronic inrush current limiter SCL 3680 puts things right: Reducing the high switch-on currents for a short time, it avoids that the fuse is triggered.
The H-Tronic inrush current limiter SCL 3680 avoids that the fuse is triggered accidentally with a powerful end-use customer being switched on. The adapter plug reduces the load peaks typical of high-consumption devices when switching on.
It serves e.g. to limit the inrush current of angle grinders, circular saws, compressors, pumps, drills, and other powerful end-use customers.
This inrush current limiter is suitable for circuits with a 16 A protection.
Abmessungen: | 98 x 59 x 41 mm |
---|---|
Farbe: | schwarz |
Leistungsaufnahme: | max. 3680 W, Standby ca. 0,6 W |
Material: | Kunststoff |
Max. Eingangsleistung (W): | 3680 Watt |
Max. temperature: | 50 °C |
Maximaler Betriebsstrom: | 16 Ampere |
Min. temperature: | -10 °C |
Netzspannung/Frequenz (V~Hz): | 230 V / 50 Hz |
Produktart: | Strombegrenzer |
Schutzart (IP): | IP20 |
präzise Produktart: | Einschaltstrombegrenzer |
Empfehlung: Schalter Temperatur
Currently not available
• Reduces the switch-on load peaks
• For angle grinders, circular saws, compressors, pumps, drills, etc.
• Max. 16 A nominal voltage, max. 3680 W nominal power
• Suitable for circuits with 16 A fuse protection
Currently not available
• Operation and monitoring free functioning
• Adjustable to heating or cooling
• Temperature adjustment in steps of 0.1 °C
• Remote measurement of up to 50 m
Empfehlung: Wasserstand Schalter-Regler
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Currently not available
• HDPE ball Ø155mm, welded stainless-steel loop
• Footvalve Ø48mm 1" external thread with filter 1 mm mesh size
• Threaded spout 1" external thread and W4 clamp for 1" hose
• Entirely pre-assembled for connecting to a pump hose
Currently not available
• For the closing of awnings or sunblinds
• For the closing of rooflights
• With anti-freezing/anti-condensation heating
• Installation on flat roof, pitched roof, or house wall
Currently not available
• To detect leakage & flooding at an early stage
• Sounds alarm in case of water contact (82 dB)
• Moisture sensor to prevent consequential damage
• Alerts to pipe burst, flooding, heavy rain, etc.
Currently not available
• Sensor cable 10 m
• 160 x 80 x 60 mm
• Cable length 2 m
Currently not available
• Responsivity for reaction < 50 kOhm
• Sensor Cable 10 m
• Range of function: –15 °C / +40 °C
• LED display for: Level, mains, Rel. Ein
• Cable Length: 2 m
Currently not available
• Responsivity for reaction < 50 kOhm
• Cable length 2 m / sensor 2x 10 m
• Range of function: –15 °C / +40 °C
• LED display for: sensor min/max., mains, default, relay (Rel. Ein)
Currently not available
• Trigger sensitivity 10/200 kOhm
• Sensor cable 30 m
• Functional area –15 °C / +40 °C
• Cable length 2 m
Currently not available
• Cable length 10 m
• For water level switch
Currently not available
• Cable length 10 m
• Suitable for water level switch
• WPS 3000 & WPS 3000plus
Currently not available
• Cable length 30 m
• Suitable for the water level switch
• WPS 5000
Currently not available
• Useful dry-out protection for ponds
• Switches pump off with too low a water level
• Provides safety for unattended moments
• 5 m long cable
Currently not available
• Useful overflow protection for ponds
• Switches pump off with too high a water level
• Provides safety for unattended moments
• 5 m long cable