H-Tronic WPS 5000 water level switch with 30m cable 2500W water detector
€66.99*
Prices incl. VAT plus Shipping costs
No longer available
• Switch capacity of 2500 Watts max.
• Trigger sensitivity 10/200 kOhm
• Sensor cable 30 m
• Functional area –15 °C / +40 °C
• Cable length 2 m
The device is equipped with a water level sensor keeping track of the amount of liquid within a container and can easily be connected to most household pumps. Depending on the field of application, different devices can be connected to the switch. The switch can further be adjusted to either react to a low water gauge or an individually set peak level. In case of the former, the sensor is placed in a low position and reacts by turning on the pump the very moment that the water level drops below the designated point to once again increase the liquid level. The other option requires the sensor to be placed in an elevated position in order to make it recognise imminent congestion and cause the pump to turn on and pump the water down.
The switch further possesses a deceleration timing function that ensures that the pump will turn off after running for a set amount of time. It can for example be set to cause the pump to run for a minute, once activated, to successfully counteract increasing or decreasing water levels.
• Delay setting of switch ON/OFF adjustable 1/9.999 s (approx. 2.8 h)
• Switching point entirely selectable
• Relay to be configurated for opening/closing
• Remote measurement up to 30 m via 2-wire pipe
• Inlet for water sensor or floating switch (parallel connection possible)
• No mains voltage on the sensor
• Easy and quick assembly
• Works free of control and operation
• Dimensions 160 x 80 x 60 mm
| Abmessungen: | 160 x 68 x 102 mm |
|---|---|
| Eingangsleistung: | 3.5 Watt |
| Kabellänge (m): | 30 Meter |
| Leistungsaufnahme: | 3,5 W |
| Netzspannung/Frequenz (V~Hz): | 230 V / 50 Hz |
| Produktart: | Schwimmerschalter |
| Schutzart (IP): | IP20 |
Ersatzteile
Currently not available
• Cable length 30 m
• Suitable for the water level switch
• WPS 5000
Empfehlung: Wasserstand Schalter-Regler
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Currently not available
• HDPE ball Ø155mm, welded stainless-steel loop
• Footvalve Ø48mm 1" external thread with filter 1 mm mesh size
• Threaded spout 1" external thread and W4 clamp for 1" hose
• Entirely pre-assembled for connecting to a pump hose
Currently not available
• For the closing of awnings or sunblinds
• For the closing of rooflights
• With anti-freezing/anti-condensation heating
• Installation on flat roof, pitched roof, or house wall
Currently not available
• To detect leakage & flooding at an early stage
• Sounds alarm in case of water contact (82 dB)
• Moisture sensor to prevent consequential damage
• Alerts to pipe burst, flooding, heavy rain, etc.
Currently not available
• Sensor cable 10 m
• 160 x 80 x 60 mm
• Cable length 2 m
Currently not available
• Responsivity for reaction < 50 kOhm
• Sensor Cable 10 m
• Range of function: –15 °C / +40 °C
• LED display for: Level, mains, Rel. Ein
• Cable Length: 2 m
Currently not available
• Responsivity for reaction < 50 kOhm
• Cable length 2 m / sensor 2x 10 m
• Range of function: –15 °C / +40 °C
• LED display for: sensor min/max., mains, default, relay (Rel. Ein)
Currently not available
• Trigger sensitivity 10/200 kOhm
• Sensor cable 30 m
• Functional area –15 °C / +40 °C
• Cable length 2 m
Currently not available
• Cable length 10 m
• For water level switch
Currently not available
• Cable length 10 m
• Suitable for water level switch
• WPS 3000 & WPS 3000plus
Currently not available
• Cable length 30 m
• Suitable for the water level switch
• WPS 5000
Currently not available
• Useful dry-out protection for ponds
• Switches pump off with too low a water level
• Provides safety for unattended moments
• 5 m long cable
Currently not available
• Useful overflow protection for ponds
• Switches pump off with too high a water level
• Provides safety for unattended moments
• 5 m long cable
Empfehlung: Schalter Temperatur
Currently not available
• Reduces the switch-on load peaks
• For angle grinders, circular saws, compressors, pumps, drills, etc.
• Max. 16 A nominal voltage, max. 3680 W nominal power
• Suitable for circuits with 16 A fuse protection
Currently not available
• Operation and monitoring free functioning
• Adjustable to heating or cooling
• Temperature adjustment in steps of 0.1 °C
• Remote measurement of up to 50 m