H-Tronic WPS 1000 water level switch V2 with water sensor and 10m cable 3000W water dectector
€47.99*
Prices incl. VAT plus Shipping costs
No longer available
• Switch capacity 3000 Watts max.
• Sensor cable 10 m
• 160 x 80 x 60 mm
• Cable length 2 m
Even in wells or containers it is necessary to permanently control the level of liquid.
The brand-new water level switch or water detector H-Tronic WPS 1000 will help you to achieve this task. The ingress of water or a predefined level of water makes a special relay react accordingly, switching on or off any warning devices, pumps, or solenoid valves.
WPS 1000 is well-suited for any and all reservoirs made of concrete, plastic, or metal. Due to its pluggable connections, it is installed within a short time. The switch point can be set freely and according to any level of water. The controller is supported by a robust sensor. Due to the absence of a floating switch, the water detector operates absolutely free of any disturbance.
The LED panel displays the actual status at any time.
• Selectable switching point for any water level
• Remote measuring up to 10 m by two-core cable
• Suitable for all reservoirs made of concrete, plastic, or metal
• No dangerous mains voltage on the sensor
• Robust sensor
• Non-monitored operation
• Simple and quick assembly, ready to plug
• LED display for mains and relay (Rel. Ein)
• Switch outlet optionally to use as an opening or to close
Abmessungen: | 160 x 80 x 60 mm |
---|---|
Eingangsleistung: | 1.5 Watt |
Kabellänge (m): | 2 Meter |
Leistungsaufnahme: | 1,5 W |
Netzspannung/Frequenz (V~Hz): | 220–240 V / 50 Hz |
Schutzart (IP): | IP20 |
Empfehlung: Wasserstand Schalter-Regler
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Currently not available
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Currently not available
• HDPE ball Ø155mm, welded stainless-steel loop
• Footvalve Ø48mm 1" external thread with filter 1 mm mesh size
• Threaded spout 1" external thread and W4 clamp for 1" hose
• Entirely pre-assembled for connecting to a pump hose
Currently not available
• For the closing of awnings or sunblinds
• For the closing of rooflights
• With anti-freezing/anti-condensation heating
• Installation on flat roof, pitched roof, or house wall
Currently not available
• To detect leakage & flooding at an early stage
• Sounds alarm in case of water contact (82 dB)
• Moisture sensor to prevent consequential damage
• Alerts to pipe burst, flooding, heavy rain, etc.
Currently not available
• Sensor cable 10 m
• 160 x 80 x 60 mm
• Cable length 2 m
Currently not available
• Responsivity for reaction < 50 kOhm
• Sensor Cable 10 m
• Range of function: –15 °C / +40 °C
• LED display for: Level, mains, Rel. Ein
• Cable Length: 2 m
Currently not available
• Responsivity for reaction < 50 kOhm
• Cable length 2 m / sensor 2x 10 m
• Range of function: –15 °C / +40 °C
• LED display for: sensor min/max., mains, default, relay (Rel. Ein)
Currently not available
• Trigger sensitivity 10/200 kOhm
• Sensor cable 30 m
• Functional area –15 °C / +40 °C
• Cable length 2 m
Currently not available
• Cable length 10 m
• For water level switch
Currently not available
• Cable length 10 m
• Suitable for water level switch
• WPS 3000 & WPS 3000plus
Currently not available
• Cable length 30 m
• Suitable for the water level switch
• WPS 5000
Currently not available
• Useful dry-out protection for ponds
• Switches pump off with too low a water level
• Provides safety for unattended moments
• 5 m long cable
Currently not available
• Useful overflow protection for ponds
• Switches pump off with too high a water level
• Provides safety for unattended moments
• 5 m long cable
Empfehlung: Schalter Temperatur
Currently not available
• Reduces the switch-on load peaks
• For angle grinders, circular saws, compressors, pumps, drills, etc.
• Max. 16 A nominal voltage, max. 3680 W nominal power
• Suitable for circuits with 16 A fuse protection
Currently not available
• Operation and monitoring free functioning
• Adjustable to heating or cooling
• Temperature adjustment in steps of 0.1 °C
• Remote measurement of up to 50 m