H-Tronic PLS 1000 Humidity Regulator Heat-recovery Ventilation Hygrometry Dew Point Control
214,99 €*
Ceny zawierają podatek VAT + Koszty wysyłki
Nie jest już dostępny
• Wall casing size: 17 x 14 x 6,8 cm
• Sensor casing size: 6.7 x 3.7 x 2.2 cm
• 5 different modes
• Remote measurement up to 50 m possible
• 4 potential-free relays
Since this device is suitable for both wall and DIN rail mounting, it is easy to attach and can be used flexibly. The PLS 1000 can measure the current relative humidity as well as the current temperature in two environments with the help of two sensors included in the scope of delivery. The device then determines the absolute air humidity as well as the respective dew points from these values. Based on these values, 5 different modes can be used to implement different humidity and temperature regulations.
Room fans for supply and return air can be controlled and operated directly via 4 integrated potential-free relays. Apart from the measurement of humidity and temperature, this system also enables automatic ventilation, drying or humidification of rooms as well as the implementation of a temperature and humidity switch on 2 channels.
The 5 different modes include the following functions:
- Temperature and humidity measurement
- Room and basement drying
- DT ventilation (This mode is used to ventilate rooms by supplying fresh air). Ventilation takes place when the temperature of the outside air is lower than that of the inside air.)
- Temperature and humidity switch
- Manual temperature adjustment
Empfehlung: Druckschalter
Aktualnie niedostępne
• Sensor casing size: 6.7 x 3.7 x 2.2 cm
• 5 different modes
• Remote measurement up to 50 m possible
• 4 potential-free relays
Aktualnie niedostępne
• Start pressure range 6 - 8 bar
• Pressure setting range 6 – 12.5 bar
• Operating pressure max. 12.5 bar
• For water pumps, garden pumps and compressors
Aktualnie niedostępne
• Start pressure setting range 5.5 to 8 bar
• Pressure setting range 5.5 to 12.5 bar
• Operating pressure max. 12,5 bar
• For domestic water pumps, garden pumps, compressors
Aktualnie niedostępne
- Pump control with cable
- Compatible with our pumps: 50760, 50758, 50753
Aktualnie niedostępne
• Z integrowaną wtyczką
• Utrzymuje stałe ciśnienie wody
• Ciśnienie startowe 1,5 bara & maks. ciśnienie robocze 10 bara
• Ochrona przed suchobiegiem
Aktualnie niedostępne
• Z 2 kablami (złącze styku uziemiającego / wtyk)
• Utrzymuje stałe ciśnienie wody
• Ciśnienie startowe 1,5 bara & maks. ciśnienie robocze 10 bara
• Ochrona przed suchobiegiem
Aktualnie niedostępne
• Ciśnienie rozruchowe 1,5 bara & maks. ciśnienie robocze 10 bara
• łącznie z 2 kablami (złącze styku uziemiającego / wtyk)
• Ochrona przed suchobiegiem
• Utrzymuje stałe ciśnienie wody
Aktualnie niedostępne
• Z integrowaną wtyczką
• Utrzymuje stałe ciśnienie wody
• Ciśnienie startowe 1,5 bara & maks. ciśnienie robocze 10 bara
• Ochrona przed suchobiegiem
Aktualnie niedostępne
• Ciśnienie początkowe 1,5 bara
• Maks. ciśnienie robocze 10 barów
• Do stosowania w domowych układach wodociągowych, pompach, kompresorach
Aktualnie niedostępne
• Ciśnienie początkowe 1,5–3 bara
• Zakres ustawianego ciśnienia wynosi 1,5–3 bara
• Maks. ciśnienie robocze 10 barów
• Do domowych układów wodociągowych, pomp, kompresorów
Aktualnie niedostępne
• Ciśnienie początkowe 1,5 bara
• Maks. ciśnienie robocze 10 barów
• Do stosowania w domowych układach wodociągowych, pompach, kompresorach
Aktualnie niedostępne
• Start pressure range 5.5 - 8 bar
• Pressure setting range 3 - 12 bar
• Operating pressure max.13 bar
• For water pumps, garden pumps and compressors
Aktualnie niedostępne
• Ciśnienie początkowe 1,4–2,8 bara
• Zakres ustawianego ciśnienia wynosi 1,4–4,1 bara
• Maks. ciśnienie robocze 6 barów
• Do domowych układów wodociągowych, pomp, kompresorów
Aktualnie niedostępne
• Ciśnienie początkowe 1,4–2,8 bara
• Zakres ustawianego ciśnienia wynosi 1,4–4,1 bara
• Maks. ciśnienie robocze 6 barów
• Do domowych układów wodociągowych, pomp, kompresorów
Aktualnie niedostępne
• Ciśnienie początkowe 1,4–2,8 bara
• Zakres ustawianego ciśnienia wynosi 1,4–4,1 bara
• Maks. ciśnienie robocze 6 barów
• Do domowych układów wodociągowych, pomp, kompresorów
Aktualnie niedostępne
• Ciśnienie początkowe 1,4–2,8 bara
• Zakres ustawianego ciśnienia wynosi 1,4–4,1 bara
• Maks. ciśnienie robocze 6 barów
• Do domowych układów wodociągowych, pomp, kompresorów
Aktualnie niedostępne
• Ciśnienie początkowe 1,5 bara
• Maks. ciśnienie robocze 10 barów
• Do stosowania w domowych układach wodociągowych, pompach, kompresorach
Aktualnie niedostępne
• Jednofazowy / 220–240 V / 10 A
• Utrzymuje stałe ciśnienie wody
• Ciśnienie startowe 1,5 bara & maks. ciśnienie robocze 10 bara
• Ochrona przed suchobiegiem
Aktualnie niedostępne
• Ciśnienie początkowe 1,5 bara
• Maks. ciśnienie robocze 10 barów
• Do stosowania w domowych układach wodociągowych, pompach, kompresorach
Aktualnie niedostępne
• Ciśnienie rozruchowe 1,5 bara & maks. ciśnienie robocze 10 bara
• łącznie z 2 kablami (złącze styku uziemiającego / wtyk)
• Ochrona przed suchobiegiem
• Utrzymuje stałe ciśnienie wody
Aktualnie niedostępne
• Ciśnienie rozruchowe 1,5 bara
• Maks. ciśnienie robocze 10 bara
• Ochrona przed suchobiegiem
• Utrzymuje stałe ciśnienie wody
Aktualnie niedostępne
• Ciśnienie rozruchowe 1,5 bara
• Maks. ciśnienie robocze 10 bara
• Ochrona przed suchobiegiem
• Utrzymuje stałe ciśnienie wody
Aktualnie niedostępne
• Ciśnienie rozruchowe 1,5 bara & maks. ciśnienie robocze 10 bara
• łącznie z 2 kablami (złącze styku uziemiającego / wtyk)
• Ochrona przed suchobiegiem
• Utrzymuje stałe ciśnienie wody
Aktualnie niedostępne
• Ciśnienie rozruchowe 1,5 bara
• Maks. ciśnienie robocze 10 bara
• Ochrona przed suchobiegiem
• Utrzymuje stałe ciśnienie wody
Empfehlung: Pumpe Hauswasserwerk
Aktualnie niedostępne
• Makes rainwater available for house and garden
• Handle for comfortable transportation
• Built-in filter and pressure gauge
• Built-in pressure switch
Aktualnie niedostępne
• Max. Suction Height 7 m
• Max. Delivery Head: 46 m
• with Pump Control SK-13
Aktualnie niedostępne
• Power consumption 3200 l/h
• Delivery head 38 m
• Suction head 8 m
• Power 800 watts
• Thermal protection
• Thread 1 inch
Aktualnie niedostępne
• Output: 1200 W
• 19 L pressure tank volume
• Pressure gauge
• Built-in pressure switch
Aktualnie niedostępne
• Output: 1300 W
• Built-in filter and pressure gauge
• Integrated pressure switch
• 19 L pressure tank volume
Aktualnie niedostępne
• Max. Suction Height 7 m
• Max. Delivery Head: 46 m
Aktualnie niedostępne
• For fresh, clear and well water
• 600 W power output
• Max. discharge head 35 m
• Flow rate 2800 litres per hour
Aktualnie niedostępne
• For fresh, clear and well water
• 600 W power output
• Max. discharge head 35 m
• Flow rate 2800 litres per hour
Aktualnie niedostępne
• For fresh, clear and well water
• 1200 W power output
• Max. discharge head 48 m
• Flow rate 3800 litres per hour
Aktualnie niedostępne
• For fresh, clear and well water
• 1200 W power output
• Max. discharge head 48 m
• Flow rate 3800 litres per hour
Aktualnie niedostępne
• Max. Suction Height 7 m
• Max. Delivery Head: 45 m
• with Pump Control SK-13
Aktualnie niedostępne
• Max. Suction Height 8 m
• Max. Delivery Head: 50 m
Aktualnie niedostępne
• Output: 1100 W
• Built-in filter unit
• Extra large inlet
• 32.89 mm (G1") connection
Aktualnie niedostępne
• Moc: 1200 W
• Manometr
• Z wbudowanym przełącznikiem ciśnieniowym
• Zbiornik membranowy o pojemności 19 l
Aktualnie niedostępne
• Flowrate up to 2800 l/h
• With manometer and pressure switch
• Pumps rainwater, process water and groundwater
• Reduces the energy consumption
Aktualnie niedostępne
• Flowrate up to 3000 l/h
• With manometer and pressure switch
• Pumps rainwater, process water and groundwater
• Reduces the energy consumption
Empfehlung: Membrankessel
Aktualnie niedostępne
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Vertical mounting
Aktualnie niedostępne
• 32.89-mm (1″) thread connection
• EPDM rubber thread
• For domestic waterworks
• Vertical mounting
Aktualnie niedostępne
• 32.89-mm (1″) thread connection
• Diameter holes: 9 x 20 mm
• Hole spacing long: 315 x 255 mm
• EPDM rubber membrane
• Membrane boiler for domestic waterworks
• Horizontal with pump attachment plate
Aktualnie niedostępne
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Horizontal with pump attachment plate
Aktualnie niedostępne
• 32,89 mm (1") thread connection
• Membrane included
• For Domestic waterworks
• Horizontal with pump-fixation
Aktualnie niedostępne
• 32.89-mm (1″) thread connection
• EPDM membrane
• For domestic waterworks
• Horizontal with pump fixation
Aktualnie niedostępne
• Przyłącze gwintowe 32,89 mm (1″)
• Membrana EPDM
• Zbiornik membranowy do hydroforów domowych
• Wykonanie pionowe
Aktualnie niedostępne
• Przyłącze gwintowe 32,89 mm (1″)
• Membrana EPDM
• Zbiornik membranowy do hydroforów domowych
• Wykonanie pionowe
Aktualnie niedostępne
• Przyłącze gwintowe 32,89 mm (1″)
• Membrana EPDM
• Zbiornik membranowy do hydroforów
• Poziomo z płytą mocującą hydrofor
Aktualnie niedostępne
• Złącze gwintowe o rozmiarze 32,89 mm (1″)
• Średnica otworów: 9 mm
• Odstęp między otworami długość: 315 x 240 mm
• Membrana EPDM
• Zbiornik membranowy do hydroforów domowych