Zbiornik ciśnieniowy 100l kocioł membranowy EPDM do domowych wodociągów i systemów wspomagających
234,99 €*
Ceny zawierają podatek VAT + Koszty wysyłki
Natychmiast dostępny, czas dostawy 2 - 3 days(1)
• Zbiornik ciśnieniowy o pojemności 100 litrów
• Przyłącze gwintowe 32,89 mm (1″)
• Membrana EPDM
• Zbiornik membranowy do hydroforów domowych
• Wykonanie pionowe
100-litrowy zbiornik (typ zbiornik 100LV SS) jest dostarczany wraz z membraną EPDM. Zbiornik jest projektowany do maksymalnego ciśnienia 5,4 bar i jest dostarczany w wykonaniu pionowym. Producent przeprowadza test szczelności zbiornika wodą pod ciśnieniem do 5,4 bara.
Kocioł membranowy posiada przyłącze o średnicy 32,89–33,25 mm (stare: 1 cala). Dodatkowo, zbiornik ciśnieniowy ma wbudowane zawór (zawór Schradera/zawór samochodowy), który kontroluje i reguluje przeciwny ciśnienie membrany.
Te zbiorniki ciśnieniowe są spawane z wysokiej jakości blach stalowych zgodnie z normami UNI-EN i wyposażone w trwałą i odporną na starzenie się membranę EPDM. Membrana EPDM jest łatwa do wymiany.
O membranie etylenowo-propylenowo-dienowej-kauczukowej (EPDM):
Ten kauczuk membranowy należy do grupy elastomerów. Tworzywo sztuczne cechuje się odpornością na gorące powietrze, wpływ warunków atmosferycznych i ozonu. Elastomer wykazuje niską przepuszczalność gazów, dobrą odporność chemiczną i bardzo dobre właściwości tłumiące wibracje i energię uderzeniową do 100 °C.
W niskiej temperaturze Ethylen-Propylen-Dien-Kauczuk pozostaje elastyczny do −70 °C. Główne obszary zastosowania Ethylen-Propylen-Dien-Kauczuku to węże powietrzne i dętki, balony grzewcze, węże parowe i obudowa wnętrza zbiorników. Inne obszary zastosowania to folie, membrany i masy uszczelniające.
Do ciśnieniowego zbiornika membranowego:
Należy zachować odpowiednie ciśnienie wstępne, które powinno wynosić około 0,1–0,2 bara poniżej ciśnienia włączania pompy i regularnie sprawdzać to ciśnienie. Nieprzestrzeganie tej zasady może prowadzić do uszkodzenia membrany EPDM w zbiorniku membranowym pod ciśnieniem. Dokładniejsze obliczenia wykazują, że ciśnienie wstępne wynosi: Ciśnienie włączania pompy x 0,9. Na przykład: ciśnienie włączania pompy na przekaźniku ciśnienia hydroforu jest ustawione na 1,5 bara: 1,5 bara x 0,9 = 1,3–1,4 bara.
Ważne: Ciśnienie w zbiorniku powinno być regulowane tylko po uprzednim opróżnieniu systemu wodociągowego.
Uwaga: Przed otwarciem zbiornika membranowego należy koniecznie spuścić powietrze i ciśnienie wody!
Betriebsdruck: | 5.4 Bar |
---|---|
Druck: |
5,4 bar Wasserdruck Luftdruck 1.8 / N2-Vordruck: ca. 2 bar |
Farbe: | grau |
Fassungsvermögen in Liter: | 100 Liter |
Luftdruck: | 1.8 Bar |
Material: | Edelstahl 304 |
Material Membran: | Ethylen-Propylen-Dien-Kautschuk (EPDM) |
Materialstärke: | 1 Millimeter |
Max. temperature: | 99 °C |
Membran: | EPDM (auswechselbar) |
Min. temperature: | 4 °C |
Produktart: | Hauswasserwerk |
Stickstoff Vordruck: | 2 Bar |
max. Druck (bar): | 5.6 Bar |
präzise Produktart: | Membrankessel |
Ersatzteile
Dostępny, czas dostawy 2 - 3 days
• For 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• for 24-100 Liter Pressure Vessels
• Material: Stainless Steel
Dostępny, czas dostawy 2 - 3 days
• For 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• for 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• 1x 32,89 mm (1″) ET
• 1x 12,91 mm (¼″) ET
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• For 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• For pressure tank vessel
• Expansion for domestic waterworks
Dostępny, czas dostawy 2 - 3 days
• For 24 – 100 litre pressure vessels
• Outer thread ⌀ ½ inch and ⌀ ⅜ inch
• Inner thread ⌀ ⅜ inch and ⌀ ¼ inch
• Space-saving and durable
Dostępny, czas dostawy 2 - 3 days
• for 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• For 24–100 litre pressure vessels
• Outer thread ⌀ 1 inch (32.89 mm)
• Inner thread ⌀ ⅜ inch (16.41 mm)
• Space-saving and durable
Dostępny, czas dostawy 2 - 3 days
• For 24-100 Liter Pressure Vessels
Empfehlung: Membrankessel
Dostępny, czas dostawy 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Vertical mounting
Dostępny, czas dostawy 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber thread
• For domestic waterworks
• Vertical mounting
Dostępny, czas dostawy 2 - 3 days
• 32.89-mm (1″) thread connection
• Diameter holes: 9 x 20 mm
• Hole spacing long: 315 x 255 mm
• EPDM rubber membrane
• Membrane boiler for domestic waterworks
• Horizontal with pump attachment plate
Dostępny, czas dostawy 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Horizontal with pump attachment plate
Dostępny, czas dostawy 2 - 3 days
• 32,89 mm (1") thread connection
• Membrane included
• For Domestic waterworks
• Horizontal with pump-fixation
Dostępny, czas dostawy 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM membrane
• For domestic waterworks
• Horizontal with pump fixation
Dostępny, czas dostawy 2 - 3 days
• Przyłącze gwintowe 32,89 mm (1″)
• Membrana EPDM
• Zbiornik membranowy do hydroforów domowych
• Wykonanie pionowe
Dostępny, czas dostawy 2 - 3 days
• Przyłącze gwintowe 32,89 mm (1″)
• Membrana EPDM
• Zbiornik membranowy do hydroforów domowych
• Wykonanie pionowe
Dostępny, czas dostawy 2 - 3 days
• Przyłącze gwintowe 32,89 mm (1″)
• Membrana EPDM
• Zbiornik membranowy do hydroforów
• Poziomo z płytą mocującą hydrofor
Dostępny, czas dostawy 2 - 3 days
• Złącze gwintowe o rozmiarze 32,89 mm (1″)
• Średnica otworów: 9 mm
• Odstęp między otworami długość: 315 x 240 mm
• Membrana EPDM
• Zbiornik membranowy do hydroforów domowych
Empfehlung: Pumpe Hauswasserwerk
Dostępny, czas dostawy 2 - 3 days
• Makes rainwater available for house and garden
• Handle for comfortable transportation
• Built-in filter and pressure gauge
• Built-in pressure switch
Dostępny, czas dostawy 2 - 3 days
• Max. Suction Height 7 m
• Max. Delivery Head: 46 m
• with Pump Control SK-13
Dostępny, czas dostawy 2 - 3 days
• Power consumption 3200 l/h
• Delivery head 38 m
• Suction head 8 m
• Power 800 watts
• Thermal protection
• Thread 1 inch
Dostępny, czas dostawy 2 - 3 days
• Output: 1200 W
• 19 L pressure tank volume
• Pressure gauge
• Built-in pressure switch
Dostępny, czas dostawy 2 - 3 days
• Output: 1300 W
• Built-in filter and pressure gauge
• Integrated pressure switch
• 19 L pressure tank volume
Dostępny, czas dostawy 2 - 3 days
• Max. Suction Height 7 m
• Max. Delivery Head: 46 m
Dostępny, czas dostawy 2 - 3 days
• For fresh, clear and well water
• 600 W power output
• Max. discharge head 35 m
• Flow rate 2800 litres per hour
Dostępny, czas dostawy 2 - 3 days
• For fresh, clear and well water
• 600 W power output
• Max. discharge head 35 m
• Flow rate 2800 litres per hour
Dostępny, czas dostawy 2 - 3 days
• For fresh, clear and well water
• 1200 W power output
• Max. discharge head 48 m
• Flow rate 3800 litres per hour
Dostępny, czas dostawy 2 - 3 days
• For fresh, clear and well water
• 1200 W power output
• Max. discharge head 48 m
• Flow rate 3800 litres per hour
Dostępny, czas dostawy 2 - 3 days
• Max. Suction Height 7 m
• Max. Delivery Head: 45 m
• with Pump Control SK-13
Dostępny, czas dostawy 2 - 3 days
• Max. Suction Height 8 m
• Max. Delivery Head: 50 m
Dostępny, czas dostawy 2 - 3 days
• Output: 1100 W
• Built-in filter unit
• Extra large inlet
• 32.89 mm (G1") connection
Dostępny, czas dostawy 2 - 3 days
• Moc: 1200 W
• Manometr
• Z wbudowanym przełącznikiem ciśnieniowym
• Zbiornik membranowy o pojemności 19 l
Dostępny, czas dostawy 2 - 3 days
• Flowrate up to 2800 l/h
• With manometer and pressure switch
• Pumps rainwater, process water and groundwater
• Reduces the energy consumption
Dostępny, czas dostawy 2 - 3 days
• Flowrate up to 3000 l/h
• With manometer and pressure switch
• Pumps rainwater, process water and groundwater
• Reduces the energy consumption
Empfehlung: Membrankessel Zubehör
Dostępny, czas dostawy 2 - 3 days
• 1x 32,89mm (1") ET
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• 1x 32,89 mm (1″) ET
• 1x 12,91 mm (¼″) ET
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• 1x 32,89 mm (1″) ET
• 1x 12,91 mm (¼″) FT
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• 1x 32,89mm (1") ET
• 1x 12,91mm (1/4") FT
• 1x 12,91mm (1/4") ET
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• DN25 33,7mm (1 Inch) Female Thread
• DN25 33,7mm (1 Inch) Male Thread
• Braided with stainless steel
• E.g. Pressure vessels in domestic waterworks
Treść: 0.5 metre(s) (27,98 €* / 1 metre(s))
Dostępny, czas dostawy 2 - 3 days
• 32.89 mm (G1″) IT & 32.89 mm (G1″) ET
• Braided with stainless steel
• E.g. Pressure vessels in domestic waterworks
Dostępny, czas dostawy 2 - 3 days
• 0–12 bar resp. 0–170 PSI
• ø 50 mm Pressure Gauge radial
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Treść: 0.3 metre(s) (21,63 €* / 1 metre(s))
Dostępny, czas dostawy 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Treść: 0.6 metre(s) (19,42 €* / 1 metre(s))
Dostępny, czas dostawy 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Treść: 0.7 metre(s) (22,84 €* / 1 metre(s))
Dostępny, czas dostawy 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Treść: 0.8 metre(s) (21,24 €* / 1 metre(s))
Dostępny, czas dostawy 2 - 3 days
• 0-10 bar resp. 0-140 PSI
• Ø 50mm Pressure Gauge axial
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• 0-12 bar resp. 0-170 PSI
• Ø 50mm Pressure Gauge radial
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• 0-12 bar resp. 0-180 PSI
• Ø 50mm Pressure Gauge axial
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• 1/2″ male thread (20.95 mm) and 1/2″ union nut (18.64 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 1/2″ union nut (18.64 mm) and 3/4″ union nut (24.12 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 3/4″ male thread (26.44 mm) and 1/2″ union nut (18.64 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 3/4″ union nut (24.12 mm) and 1/2″ male thread (20.95 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 3/4″ union nut with elbow (24.12 mm) and 1/2″ male thread (20.95 mm)
• Connection hose with DN13 and 1000 mm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 3/4″ union nut with elbow (24.12 mm) and 1/2″ union nut (18.64 mm)
• Connection hose with DN13 and 1000 mm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 3/4″ union nut with elbow (24.12 mm) and 3/4″ union nut (24.12 mm)
• Connection hose with DN13 and 1000 mm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 2 connections: 1/2″ union nut (UN) (18.64 mm)
• Connection hose with 13DN inner diameter and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 3/4″ union nut (24.12 mm) and 3/4″ male thread (26.44 mm)
• Connection hose with DN19 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 2 connections: 3/4″ union nut (UN) (24.12 mm)
• Connection hose with 19DN inner diameter and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate