Float Ball Set 1 Inch for Floating Discharge, Float Set with Filter, Valve, and Spout
Ilość | Cena jednostkowa | Zniżka |
---|---|---|
Od 1 |
17,99 €*
|
|
Od 2 |
16,96 €*
|
-6% |
Od 5 |
16,07 €*
|
-11% |
Ceny zawierają podatek VAT + Koszty wysyłki
Nie jest już dostępny
• Float set for discharge of clean water
• HDPE ball Ø155mm, welded stainless-steel loop
• Footvalve Ø48mm 1" external thread with filter 1 mm mesh size
• Threaded spout 1" external thread and W4 clamp for 1" hose
• Entirely pre-assembled for connecting to a pump hose
A float ball made from hard polyethylene plastic (HDPE) with a welded stainless-steel loop. The float ball (diameter 155 mm) is a lifting body that keeps the suction spot close under the surface of the water. Thus, it prevents dirty water and contaminations such as sand or mud from the bottom of the water tank from being sucked in. The coarse suction filter with non-return valve is fixed to the support loop with the help of the fixing hook included.
The suction basket made from stainless-steel and having a mesh size of 1 mm filters coarse dirt particles out of the water sucked in, thus protecting the pump from being obstructed. The footvalve, having an external 1-inch brass thread, prevents the suction hose from draining and air from getting into the pump. The valve has a total diameter of 48 mm.
The built-in hose spout with external 1-inch brass thread and built-in O-ring made from NBR is best suitable as connecting piece for 1-inch hoses (25 mm). Using the screw-threaded rust-free W4 hose clamp, you will be able to connect your suction and pressure hose in a tight and safe way.
The float set, already being entirely pre-assembled, can be connected directly to your domestic waterworks or pump. Simply connect the float set to the pumping system via a suction hose – and clean water can immediately be taken out for domestic or garden use.
Empfehlung: Wasserstand Schalter-Regler
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Aktualnie niedostępne
• HDPE ball Ø155mm, welded stainless-steel loop
• Footvalve Ø48mm 1" external thread with filter 1 mm mesh size
• Threaded spout 1" external thread and W4 clamp for 1" hose
• Entirely pre-assembled for connecting to a pump hose
Aktualnie niedostępne
• Składanie osłon przeciwsłonecznych lub markizy
• Zamykanie okien dachowych
• Z funkcją ogrzewania przeciwdziałającego oblodzeniu/osadom rosy
• Możliwość montażu na dachu płaskim, pochyłym lub na ścianie domu
Aktualnie niedostępne
• To detect leakage & flooding at an early stage
• Sounds alarm in case of water contact (82 dB)
• Moisture sensor to prevent consequential damage
• Alerts to pipe burst, flooding, heavy rain, etc.
Aktualnie niedostępne
• Sensor cable 10 m
• 160 x 80 x 60 mm
• Cable length 2 m
Aktualnie niedostępne
• Responsivity for reaction < 50 kOhm
• Sensor Cable 10 m
• Range of function: –15 °C / +40 °C
• LED display for: Level, mains, Rel. Ein
• Cable Length: 2 m
Aktualnie niedostępne
• Czułość wyzwalania < 50 kiloom
• Długość kabla 2 m
• Zakres temperatury roboczej: −15 °C / +40 °C
• Wyświetlanie: Min/Maks. czujnika, sieć, błąd, Rel. wejście
• Długość przewodu czujnika: 2x 10 m
Aktualnie niedostępne
• Trigger sensitivity 10/200 kOhm
• Sensor cable 30 m
• Functional area –15 °C / +40 °C
• Cable length 2 m
Aktualnie niedostępne
• Cable length 10 m
• For water level switch
Aktualnie niedostępne
• Cable length 10 m
• Suitable for water level switch
• WPS 3000 & WPS 3000plus
Aktualnie niedostępne
• Cable length 30 m
• Suitable for the water level switch
• WPS 5000
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Aktualnie niedostępne
• Praktyczne zabezpieczenie przed przelewem dla stawów
• Wyłącza się przy za wysokim poziomie wody
• Zapewnia bezpieczeństwo w nieobserwowanych momentach
• Kabel o długości 5 m
Aktualnie niedostępne
• Useful dry-out protection for ponds
• Switches pump off with too low a water level
• Provides safety for unattended moments
• 5 m long cable
Empfehlung: Schalter Temperatur
Aktualnie niedostępne
• Reduces the switch-on load peaks
• For angle grinders, circular saws, compressors, pumps, drills, etc.
• Max. 16 A nominal voltage, max. 3680 W nominal power
• Suitable for circuits with 16 A fuse protection
Aktualnie niedostępne
• Operation and monitoring free functioning
• Adjustable to heating or cooling
• Temperature adjustment in steps of 0.1 °C
• Remote measurement of up to 50 m