H-Tronic WS 10 czujnik wody do WPS 1000 długość 10 m wtyczka jack 2,5 mm czujnik pomiarowy
11,49 €*
Ceny zawierają podatek VAT + Koszty wysyłki
Nie jest już dostępny
• 2.5 mm plug
• Cable length 10 m
• For water level switch
The device is suitable for measuring the gauge height of conductive liquids, e.g., in tanks or wells. The sensor system is made of metal and securely cast in a plastic case.
The level sensor, also equipped with a connection cable with a length of 10 m, is only intended for use in non-aggressive media.
This water sensor is suitable for H-Tronic water gauge switches, such as the WD 1000 (WilTec item No. 30572) or the WPS 1000 V1 (WilTec item No. 30268). V2 requires the use of the water sensor WS 5030 (WilTec item No. 30274). Please ensure that the sensor fits your water level switch before purchasing.
Kabellänge (m): | 10 Meter |
---|
Empfehlung: Wasserstand Schalter-Regler
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 5 m
Aktualnie niedostępne
• HDPE ball Ø155mm, welded stainless-steel loop
• Footvalve Ø48mm 1" external thread with filter 1 mm mesh size
• Threaded spout 1" external thread and W4 clamp for 1" hose
• Entirely pre-assembled for connecting to a pump hose
Aktualnie niedostępne
• Składanie osłon przeciwsłonecznych lub markizy
• Zamykanie okien dachowych
• Z funkcją ogrzewania przeciwdziałającego oblodzeniu/osadom rosy
• Możliwość montażu na dachu płaskim, pochyłym lub na ścianie domu
Aktualnie niedostępne
• To detect leakage & flooding at an early stage
• Sounds alarm in case of water contact (82 dB)
• Moisture sensor to prevent consequential damage
• Alerts to pipe burst, flooding, heavy rain, etc.
Aktualnie niedostępne
• Sensor cable 10 m
• 160 x 80 x 60 mm
• Cable length 2 m
Aktualnie niedostępne
• Responsivity for reaction < 50 kOhm
• Sensor Cable 10 m
• Range of function: –15 °C / +40 °C
• LED display for: Level, mains, Rel. Ein
• Cable Length: 2 m
Aktualnie niedostępne
• Czułość wyzwalania < 50 kiloom
• Długość kabla 2 m
• Zakres temperatury roboczej: −15 °C / +40 °C
• Wyświetlanie: Min/Maks. czujnika, sieć, błąd, Rel. wejście
• Długość przewodu czujnika: 2x 10 m
Aktualnie niedostępne
• Trigger sensitivity 10/200 kOhm
• Sensor cable 30 m
• Functional area –15 °C / +40 °C
• Cable length 2 m
Aktualnie niedostępne
• Cable length 10 m
• For water level switch
Aktualnie niedostępne
• Cable length 10 m
• Suitable for water level switch
• WPS 3000 & WPS 3000plus
Aktualnie niedostępne
• Cable length 30 m
• Suitable for the water level switch
• WPS 5000
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 10 m
Aktualnie niedostępne
• max. working temperature 50°C
• Switching angle +/- 50°
• Cable length: 2 m
Aktualnie niedostępne
• Praktyczne zabezpieczenie przed przelewem dla stawów
• Wyłącza się przy za wysokim poziomie wody
• Zapewnia bezpieczeństwo w nieobserwowanych momentach
• Kabel o długości 5 m
Aktualnie niedostępne
• Useful dry-out protection for ponds
• Switches pump off with too low a water level
• Provides safety for unattended moments
• 5 m long cable
Empfehlung: Schalter Temperatur
Aktualnie niedostępne
• Reduces the switch-on load peaks
• For angle grinders, circular saws, compressors, pumps, drills, etc.
• Max. 16 A nominal voltage, max. 3680 W nominal power
• Suitable for circuits with 16 A fuse protection
Aktualnie niedostępne
• Operation and monitoring free functioning
• Adjustable to heating or cooling
• Temperature adjustment in steps of 0.1 °C
• Remote measurement of up to 50 m