Membrana 80-100 l domowy hydrofor kocioł ciśnieniowy kocioł membranowy bukłak gumowy EPDM
Ilość | Cena jednostkowa | Zniżka |
---|---|---|
Od 1 |
45,99 €*
|
|
Od 2 |
41,15 €*
|
-11% |
Ceny zawierają podatek VAT + Koszty wysyłki
Natychmiast dostępny, czas dostawy 2 - 3 days(1)
• EPDM membrane with 80–100 litres
• For pressure tank vessel
• Expansion for domestic waterworks
Ethylene-Propylene-Diene-Monomer Rubber:
This EPDM rubber belongs to the group of elastomers. This synthetic material is characterised by resistance to hot air, weathering, and ozone.
The elastomer shows low gas permeability, good resistance to chemicals as well as up to 100 °C very good noise and shock energy absorption qualities. In the low temperature range, the butyl rubber remains elastic up to −70 °C. It is mainly used for air hoses and inner cores of tyres, bladders, steam hoses, and linings for tanks. Further fields of application are foils, membranes, unvulcanised sealants, and bands.
Abmessungen: | 160 x 160 x 654 mm |
---|---|
Aussendurchmesser (OD): | 118 Millimeter |
Druck: | 5,4 bar Wasserdruck |
Farbe: | schwarz |
Innendurchmesser (ID): | 93 Millimeter |
Material: | Ethylen-Propylen-Dien-Kautschuk (EPDM) |
Max. Fassungsvermögen in Liter: | 100 Liter |
Max. temperature: | 99 °C |
Membran: | EPDM |
Min. Fassungsvermögen in Liter: | 80 Liter |
Min. temperature: | 4 °C |
Produktart: | Hauswasserwerk |
präzise Produktart: | Membrankessel-Ersatzteile |
Ersatzteile
Dostępny, czas dostawy 2 - 3 days
• for 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• For 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• For 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• For 24 – 100 litre pressure vessels
• Outer thread ⌀ ½ inch and ⌀ ⅜ inch
• Inner thread ⌀ ⅜ inch and ⌀ ¼ inch
• Space-saving and durable
Dostępny, czas dostawy 2 - 3 days
• For 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• For 24–100 litre pressure vessels
• Outer thread ⌀ 1 inch (32.89 mm)
• Inner thread ⌀ ⅜ inch (16.41 mm)
• Space-saving and durable
Dostępny, czas dostawy 2 - 3 days
• for 24-100 Liter Pressure Vessels
• Material: Stainless Steel
Dostępny, czas dostawy 2 - 3 days
• for 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• For 24-100 Liter Pressure Vessels
Empfehlung: Membrankessel Ersatzteile
Dostępny, czas dostawy 2 - 3 days
• For 24–100 litre pressure vessels
• Outer thread ⌀ 1 inch (32.89 mm)
• Inner thread ⌀ ⅜ inch (16.41 mm)
• Space-saving and durable
Dostępny, czas dostawy 2 - 3 days
• For pressure tank vessel
• Expansion for domestic waterworks
Dostępny, czas dostawy 2 - 3 days
• For 24 – 100 litre pressure vessels
• Outer thread ⌀ ½ inch and ⌀ ⅜ inch
• Inner thread ⌀ ⅜ inch and ⌀ ¼ inch
• Space-saving and durable
Dostępny, czas dostawy 2 - 3 days
• For 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• for 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• For 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• For pressure tank vessel
• Expansion for domestic waterworks
Dostępny, czas dostawy 2 - 3 days
• For pressure tank vessel
• Expansion for domestic waterworks
Dostępny, czas dostawy 2 - 3 days
• for Pressure Tank Vessel
• Expansion for Domestic Waterworks
Dostępny, czas dostawy 2 - 3 days
• For pressure tank vessel
• Expansion for domestic waterworks
Dostępny, czas dostawy 2 - 3 days
• for Pressure Tank Vessel
• Expansion for Domestic Waterworks
• with flap for mounting valve
Dostępny, czas dostawy 2 - 3 days
• for 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• For 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• For 24-100 Liter Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• Compatible with expansion tanks with 24-100 litres
Dostępny, czas dostawy 2 - 3 days
• for 24-100 Liter Pressure Vessels
• Material: Stainless Steel
Empfehlung: Membrankessel
Dostępny, czas dostawy 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Vertical mounting
Dostępny, czas dostawy 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber thread
• For domestic waterworks
• Vertical mounting
Dostępny, czas dostawy 2 - 3 days
• 32.89-mm (1″) thread connection
• Diameter holes: 9 x 20 mm
• Hole spacing long: 315 x 255 mm
• EPDM rubber membrane
• Membrane boiler for domestic waterworks
• Horizontal with pump attachment plate
Dostępny, czas dostawy 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM rubber membrane
• For domestic waterworks
• Horizontal with pump attachment plate
Dostępny, czas dostawy 2 - 3 days
• 32,89 mm (1") thread connection
• Membrane included
• For Domestic waterworks
• Horizontal with pump-fixation
Dostępny, czas dostawy 2 - 3 days
• 32.89-mm (1″) thread connection
• EPDM membrane
• For domestic waterworks
• Horizontal with pump fixation
Dostępny, czas dostawy 2 - 3 days
• Przyłącze gwintowe 32,89 mm (1″)
• Membrana EPDM
• Zbiornik membranowy do hydroforów domowych
• Wykonanie pionowe
Dostępny, czas dostawy 2 - 3 days
• Przyłącze gwintowe 32,89 mm (1″)
• Membrana EPDM
• Zbiornik membranowy do hydroforów domowych
• Wykonanie pionowe
Dostępny, czas dostawy 2 - 3 days
• Przyłącze gwintowe 32,89 mm (1″)
• Membrana EPDM
• Zbiornik membranowy do hydroforów
• Poziomo z płytą mocującą hydrofor
Dostępny, czas dostawy 2 - 3 days
• Złącze gwintowe o rozmiarze 32,89 mm (1″)
• Średnica otworów: 9 mm
• Odstęp między otworami długość: 315 x 240 mm
• Membrana EPDM
• Zbiornik membranowy do hydroforów domowych
Empfehlung: Membrankessel Zubehör
Dostępny, czas dostawy 2 - 3 days
• 1x 32,89mm (1") ET
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• 1x 32,89 mm (1″) ET
• 1x 12,91 mm (¼″) ET
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• 1x 32,89 mm (1″) ET
• 1x 12,91 mm (¼″) FT
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• 1x 32,89mm (1") ET
• 1x 12,91mm (1/4") FT
• 1x 12,91mm (1/4") ET
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• DN25 33,7mm (1 Inch) Female Thread
• DN25 33,7mm (1 Inch) Male Thread
• Braided with stainless steel
• E.g. Pressure vessels in domestic waterworks
Treść: 0.5 metre(s) (27,98 €* / 1 metre(s))
Dostępny, czas dostawy 2 - 3 days
• 32.89 mm (G1″) IT & 32.89 mm (G1″) ET
• Braided with stainless steel
• E.g. Pressure vessels in domestic waterworks
Dostępny, czas dostawy 2 - 3 days
• 0–12 bar resp. 0–170 PSI
• ø 50 mm Pressure Gauge radial
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Treść: 0.3 metre(s) (21,63 €* / 1 metre(s))
Dostępny, czas dostawy 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Treść: 0.6 metre(s) (19,42 €* / 1 metre(s))
Dostępny, czas dostawy 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Treść: 0.7 metre(s) (22,84 €* / 1 metre(s))
Dostępny, czas dostawy 2 - 3 days
• Inside Ø of 25mm and outside Ø of 33mm
• Braided with stainless steel
• Rubber hose inside
• For membrane boilers, domestic waterworks, etc.
Treść: 0.8 metre(s) (21,24 €* / 1 metre(s))
Dostępny, czas dostawy 2 - 3 days
• 0-10 bar resp. 0-140 PSI
• Ø 50mm Pressure Gauge axial
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• 0-12 bar resp. 0-170 PSI
• Ø 50mm Pressure Gauge radial
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• 0-12 bar resp. 0-180 PSI
• Ø 50mm Pressure Gauge axial
• i.E. Domestic Waterworks, Pressure Vessels
Dostępny, czas dostawy 2 - 3 days
• 1/2″ male thread (20.95 mm) and 1/2″ union nut (18.64 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 1/2″ union nut (18.64 mm) and 3/4″ union nut (24.12 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 3/4″ male thread (26.44 mm) and 1/2″ union nut (18.64 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 3/4″ union nut (24.12 mm) and 1/2″ male thread (20.95 mm)
• Connection hose with DN13 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 3/4″ union nut with elbow (24.12 mm) and 1/2″ male thread (20.95 mm)
• Connection hose with DN13 and 1000 mm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 3/4″ union nut with elbow (24.12 mm) and 1/2″ union nut (18.64 mm)
• Connection hose with DN13 and 1000 mm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 3/4″ union nut with elbow (24.12 mm) and 3/4″ union nut (24.12 mm)
• Connection hose with DN13 and 1000 mm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 2 connections: 1/2″ union nut (UN) (18.64 mm)
• Connection hose with 13DN inner diameter and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 3/4″ union nut (24.12 mm) and 3/4″ male thread (26.44 mm)
• Connection hose with DN19 and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate
Dostępny, czas dostawy 2 - 3 days
• 2 connections: 3/4″ union nut (UN) (24.12 mm)
• Connection hose with 19DN inner diameter and 100 cm length
• Resistant to pressure, kinking, and corrosion
• Ideal for fittings, etc. – with DVGW certificate